Panasonic AKHCU200 Operating Instructions Manual page 33

Web settings
(Continued)
z NETWORK Screen
z
This screen displays the network addresses .
z On this screen, the addresses cannot be changed .
z
Item
IP ADDRESS Displays the IP address .
SUBNETMASK Displays the subnet mask .
DEFAULT Displays the default gateway .
GATEWAY
PORT Displays the port number .
MAC ADDRESS Displays the MAC address .
z VERSION Screen
z
This menu is used to display the version information for the application
software and FPGA .
Item
SOFTWARE Displays the version of the software installed on the
unit .
HARDWARE
FPGA1
HARDWARE Displays the versions of the programs installed on the
FPGA2 unit .
HARDWARE
FPGA3
Remarks
Remarks
z PM VIEW SETTING Screen
z
This menu is used to set ON or OFF for the items (IRIS, status display)
to display on the picture monitor .
indicates the factory default setting .
Setting
Item
value
CAMERA NO . ON
OFF
CAM MODE ON
OFF
SCENE FILE NO . ON
OFF
SHUTTER ON
OFF
ND FILTER ON
OFF
GAIN ON
OFF
EXTENDER INFO ON
OFF
IRIS ON
OFF
IRIS LEVEL ON
OFF
Remarks
Set the display of the camera number .
Set the display of the format of the
signal output from the camera .
Set the display of the scene file number .
Set the display of the shutter speed .
Set the display of the ND filter status .
Set the display of the gain .
Set the display of the lens extender
status .
Set the display of the IRIS f-value .
Set the display of the IRIS level bar .
z When OFF is set, the IRIS display
z
screen does not appear on the
picture monitor .
33