Panasonic AKHCU200 Operating Instructions Manual page 32

Web settings
(Continued)
z START UP Screen
z
This menu is used to set the control that is performed when the unit's
power is turned on .
indicates the factory default setting .
Setting
Item
value
CAM POWER OFF
ON
REMOTE
VF POWER OFF
ON
REMOTE
32
Remarks
Set the control of the camera's power
that is to be performed when the unit's
power is turned on .
OFF:
The camera's power will not come on
even when the unit's power is turned
on . In this case, "HEAD POWER"
must be set to ON on the operation
panel of the ROP .
ON:
The camera's power will come on
when the unit's power is turned on .
REMOTE:
Starts up in accordance with the
"HEAD POWER" state that was set
with the ROP last time .
Set the control of the viewfinder's power
that is performed when the unit's power
is turned on .
OFF:
The viewfinder's power will not come
on even when the unit's power is
turned on . In this case, "VF POWER"
must be set to ON on the operation
panel of the ROP .
ON:
When the viewfinder's POWER
switch is ON, turning on the power of
this unit also turns on the power of
the viewfinder .
REMOTE:
Starts up in accordance with the "VF
POWER" state that was set with the
ROP last time .
z ANALOG GAIN Screen
z
This menu is used to set the analog signal levels .
indicates the factory default setting .
Setting
Item
value
COMPOSITE –50
│
50
Factory setting
z ND NAME Screen
z
This menu is used to set the names of the ND filters .
The names set here are displayed for the statuses on the picture
monitor .
Names consisting of up to 4 characters can be set for ND FILTER
NAME 1 to ND FILTER NAME 4 .
indicates the factory default setting .
Setting
Item
value
ND FILTER 1
NAME 1 Max . 4
characters
ND FILTER 2
NAME 2 Max . 4
characters
ND FILTER 3
Max . 4
NAME 3
characters
ND FILTER 4
NAME 4 Max . 4
characters
Characters which can be used:
z Alphanumeric characters
z
z Spaces
z
! " # % & ' ( )  + , - . / : ; < = > ? @ [ ] _ ~
z z
`
Remarks
Set the video level of the analog
composite signal to be output from
[OUT/PM] of the VBS connectors .
(Variable range: ±8 IRE or more is
possible)
Remarks
Set the name of ND filter 1 .
Set the name of ND filter 2 .
Set the name of ND filter 3 .
Set the name of ND filter 4 .