Panasonic AKHCU200 Operating Instructions Manual page 20

Setting menu items
(Continued)
z BAR ID Screen
z
This menu is used to set the BAR IDs displayed on the color bars .
Moving the cursor to the "BAR ID" menu title and then pressing the
SELECT dial redisplays the OPERATION menu one level up .
B A R ID
B A R I D S WITCH
B R I G H T N E SS
I D 1 P O S I TION
I D 1
I D 2 P O S I TION
I D 2
O F F S E T
indicates the factory default setting .
Setting
Item
value
BAR ID SWITCH ON
OFF
BRIGHTNESS 0%
│
100%
ID1 POSITION V (vertical):
00
│
05
H (horizontal):
00
│
15
□□□□□□□□□□□□□□
ID1 ##
20
OFF
100%
V:00 H:00
##
V:01 H:00
##
V:00 H:00
Remarks
Set the display of the BAR IDs
displayed on the color bars when the
color bars are displayed to ON or OFF .
Set the character color, in units of 10 %,
of the BAR ID displayed on the color
bar when the color bar is displayed .
0%: (black), 100%: (white)
Set the display start position of BAR ID1
displayed on the color bars when the
color bars are displayed .
Set from which character in the vertical
direction and which character in the
horizontal direction, starting from the top
left of the color bar, to start displaying
the BAR ID using the font size as the
reference .
z When the coordinates of ID1 and ID2
z
are the same, bar ID1's character
string will be placed on top of bar ID2
(BAR ID2 will be below) .
When the vertical coordinates are the
same and the horizontal coordinates
differ, the BAR ID with the horizontal
coordinates set later will be placed on
top of the vertical one .
Set the character string of BAR ID1 .
The ID that is set here is displayed on
the color bar .
Up to 16 characters can be set .
Characters which can be used:
z Alphanumeric characters
z
z Spaces
z
! " # % & ' ( )  + , - . / : ; < =
z z
`
> ? @ [ ] _ ~
z When "##" has been input in the
z
character string, this part is replaced
by the camera number (1 to 19) and
displayed .
Setting
Item
value
ID2 POSITION V (vertical):
00
01
│
05
H (horizontal):
00
│
15
□□□□□□□□□□□□□□
ID2 ##
OFFSET V (vertical):
00
│
79
H (horizontal):
00
│
89
Remarks
Set the display start position of BAR ID2
displayed on the color bars when the
color bars are displayed .
Set from which character in the vertical
direction and which character in the
horizontal direction, starting from the top
left of the color bar, to start displaying
the BAR ID using the font size as the
reference .
z When the coordinates of ID1 and ID2
z
are the same, bar ID1's character
string will be placed on top of bar ID2
(BAR ID2 will be below) .
When the vertical coordinates are the
same and the horizontal coordinates
differ, the BAR ID with the horizontal
coordinates set later will be placed on
top of the vertical one .
Set the character string of BAR ID2 .
The ID that is set here is displayed on
the color bar .
Up to 16 characters can be set .
Characters which can be used:
z Alphanumeric characters
z
z Spaces
z
! " # % & ' ( )  + , - . / : ; < =
z z
`
> ? @ [ ] _ ~
z When "##" has been input in the
z
character string, this part is replaced
by the camera number (1 to 19) and
displayed .
The display positions of the bar IDs can
be finely adjusted within the font size
range .
Using the top left of the font as the
origin point, set the horizontal offset and
vertical offset .