Panasonic AKHCU200 Operating Instructions Manual page 34

Web settings
(Continued)
z PM OPERATION STATUS Screen
z
This menu is used to set ON or OFF for the operation items to display
on the picture monitor .
indicates the factory default setting .
Setting
Item
value
STATUS 0 sec
DISPLAY TIME 2 sec
4 sec
MANUAL OPERATION STATUS
MASTER GAIN ON
OFF
SHUTTER ON
OFF
LENS EXT ON
OFF
FILTER ON
OFF
SCENE FILE ON
OFF
REF LOAD ON
OFF
AUTO ON
OPERATION OFF
STATUS
34
Remarks
Set the length of the status display time .
Set the time in 1-second increments .
When the status of an item that has
been set to ON on this menu has
changed, the status is displayed on the
picture monitor for just the length of
time that was set for STATUS DISPLAY
TIME .
z When 0 (zero) is set, the operations
z
(manual and auto) are not displayed
on the picture monitor .
Set the status display for when the
master gain is changed .
Set the status display for when the
shutter speed is changed .
Set the status display for when the lens
extender is changed .
Set the status display for when the filter
is changed .
Set the status display for when the
scene file is changed .
Set the status display for when the
reference file is loaded .
Set the status display for when AWB,
ABB, or ASU is executed .
z SYSTEM Screen
z
This menu is used to initialize the menu settings .
To return the menu settings to the factory default settings, add a  mark
to INITIALIZE and then click [EXECUTE] .
The following data is initialized .
z Items in the OPERATION menu
z Items in the MAINTENANCE menu
(Excluding, however, the NETWORK screen, VERSION screen,
SYSTEM screen, and SD CARD screen .)
Furthermore, the setting information (following data) in the REMOTE
OPERATION menu* is also initialized .
z Items in the SD DETAIL menu
z Items in the SYSTEM menu
(Excluding, however, each of the HD BAR, MIC1 GAIN, MIC1 AMP,
MIC2 GAIN, and MIC2 AMP items .)
*: The REMOTE OPERATION can be operated with the ROP .