Operating; Adjusting The Volume; Temporarily Muting The Sound; Selecting An Input Signal - Hitachi ED-X12 User's Manual And Operating Manual

Operating

Operating

Adjusting the volume

1. Press the VOLUME button on the remote control.
A dialog will appear on the screen to aid you in adjusting the volume.
2.
To close the dialog and complete the operation, press the
VOLUME button again. Even if you don't do anything, the
dialog will automatically disappear after a few seconds.

Temporarily muting the sound

1.
Press the MUTE button on the remote control.
A dialog will appear on the screen indicating that you have muted the sound.
To restore the sound, press the MUTE or VOLUME button.
Even if you don't do anything, the dialog will automatically
disappear after a few seconds.

Selecting an input signal

1.
Press the INPUT button on the projector.
Each time you press the button, the projector switches its
input port as below.
RGB IN1
VIDEO
1. Press the RGB button on the remote control to select an
input port for the RGB signal.
Each time you press the button, the projector switches its RGB
input port as below.
RGB IN1 RGB IN2
when TURN ON is selected for the AUTO SEARCH item in the OPTION menu
the projector will check the RGB IN2 port.
18
RGB IN2
S-VIDEO COMPONENT VIDEO
VIDEO SEARCH
RGB
ASPECT AUTO BLANK
MAGNIFY
HOME PAGE UP VOLUME
ON
PAGE DOWN MUTE
END
OFF
ASPECT AUTO BLANK
MAGNIFY
HOME PAGE UP VOLUME
ON
PAGE DOWN MUTE
END
OFF
FREEZE MY BUTTON KEYSTONE
1 2
VIDEO SEARCH
RGB
ASPECT AUTO BLANK