Using The Automatic Adjustment Feature; Adjusting The Position - Hitachi ED-X12 User's Manual And Operating Manual

Operating

Using the automatic adjustment feature

1. Press the AUTO button on the remote control.
For an RGB signal
The vertical position, the horizontal position, the horizontal
phase and the horizontal size will be automatically adjusted.
And the aspect ratio will be automatically set to default. Make sure that the
application window is set to its maximum size prior to attempting to use this
feature. A dark picture may still be incorrectly adjusted. Use a bright picture
when adjusting.
For a video signal or s-video signal
The video format best suited for the respective input signal will be selected
automatically.
This function is available only when the AUTO mode is selected to the
VIDEO FORMAT item in the INPUT menu
function.
For a video signal, s-video signal or component video signal
The vertical position, horizontal position and aspect ratio will be automatically
set to default.
For a component video signal
The horizontal phase will be automatically set to default.
note that it may not function correctly with some input.

Adjusting the position

1.
Press the POSITION button on the remote control.
The "POSITION" indication will appear on the screen.
2.
position.
When you want to reset the operation, press the RESET button on the remote
control during the operation.
To complete this operation, press the POSITION button again. Even if you don't
do anything, the dialog will automatically disappear after a few seconds.
may appear outside a picture.
20
33)
( . For a component video
SEARCH
VIDEO RGB
BLANK
ASPECT AUTO
MAGNIFY
HOME PAGE UP VOLUME
ON
END
OFF
FREEZE MY BUTTON KEYSTONE
1 2
POSITION MENU
ENTER