Setup Menu; Auto Keystone Execute, Keystone - Hitachi ED-X12 User's Manual And Operating Manual

SETUP Menu

With the SETUP menu, the items shown in the table below
can be performed.
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
Item
AUTO
KEYSTONE
EXECUTE
KEYSTONE
WHISPER
Selecting this item performs the Automatic keystone distortion
correction. Projector automatically corrects vertical keystone
distortion due to the (forward/backward) setup angle by itself.
• This function will be executed only once when selected in the
Menu. When the slant of the projector is changed, executes this
function again.
•
in the SETUP menu, if the projector screen is inclined or angled
downward, this function may not work correctly.
• When the zoom adjustment is set to the TELE (telephoto focus),
this correction may be excessive. This function should be used
when the zoom adjustment is set to the WIDE (wide-angle focus)
whenever possible.
• When vertical degree is almost 0 degree, the automatic keystone
distortion correction may not work.
• When vertical degree is over ±30 degree, the automatic keystone
distortion correction may not work well.
• This function will be unavailable when Transition Detector is on (
Upper in the data
• The adjustable range of this function will vary with the type of input
signal. At some signals, this function may not work well.
• This function will be unavailable when Transition Detector is on (
BRIGHT NORMAL
• When the NORMAL is selected, acoustic noise and screen
brightness are reduced.
Description
Lower in the data
SETUP Menu
48).
48).
35