Correcting The Keystone Distortions; Using The Magnify Feature - Hitachi ED-X12 User's Manual And Operating Manual

Correcting the keystone distortions

1.
Press the KEYSTONE button on the
remote control. A dialog will appear on the
screen to aid you in correcting the distortion.
2.
perform the following.
1) AUTO executes automatic vertical keystone correction.
2) MANUAL displays a dialog for vertical keystone correction.
To close the dialog and complete this operation, press
the KEYSTONE button again. Even if you don't do
anything, the dialog will automatically disappear after
a few seconds.
function may not work well.
SETUP menu, if the projector screen is inclined or angled downward, the Auto
Keystone function may not work correctly.
may be excessive. This function should be used when the zoom adjustment is
set to the WIDE (wide-angle focus) whenever possible.
When vertical degree is almost 0 degree, the automatic keystone distortion
correction may not work.
When vertical degree is almost ±30 degree, the automatic keystone distortion
correction may not work well.
This function will be unavailable when Transition Detector is on

Using the magnify feature

1. Press the ON button of MAGNIFY on the remote control.
The "MAGNIFY" indication will appear on the screen
(although the indication will disappear in several seconds with
no operation), and the projector will enter the MAGNIFY mode.
2.
To move the zoom area, press the POSITION button in the MAGNIFY mode,
zoom area, press the POSITION button again.
To exit the MAGNIFY mode and restore the screen to normal, press the OFF
button of MAGNIFY on the remote control.
changed, or when the display condition is changed.
will be restored when the projector exits the MAGNIFY mode.
Operating
MAGNIFY
HOME PAGE UP VOLUME
ON
END PAGE DOWN MUTE
OFF
FREEZE MY BUTTON KEYSTONE
1 2
48).
(
SEARCH
VIDEO RGB
ASPECT AUTO BLANK
MAGNIFY
HOME PAGE UP VOLUME
ON
PAGE DOWN MUTE
END
OFF
21