Picture Menu - Hitachi ED-X12 User's Manual And Operating Manual

PICTURE Menu

With the PICTURE menu, the items shown in the table
below can be performed.
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
Item
BRIGHTNESS
CONTRAST
GAMMA
#1 DEFAULT #1 CUSTOM
#5 CUSTOM #5 DEFAULT
To adjust CUSTOM
Selecting a mode of CUSTOM and then
displays a dialog to aid you in adjusting the
mode.
This function is useful when you want to
change the brightness of particular tones.
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern Gray scale of 9 steps
Ramp
The eight equalizing bars correspond to eight tone levels of the test
pattern except the darkest in the left end. If you want to adjust the
2nd tone from left end on the test pattern (Gray scale of 9 steps),
use the equalizing adjustment bar "1". The darkest tone at the left
end of the test pattern cannot be controlled with any of equalizing
adjustment bar.
• When this function is performed, a certain extra such as a line
may appear.
Description
#2 DEFAULT
#4 CUSTOM
Gray scale of 15 steps
PICTURE Menu
Dark
Weak
#2 CUSTOM #3 DEFAULT
#4 DEFAULT #3 CUSTOM
ENTER
1 2
GAMMA CUSTOM 1
27