Using The Transition Detector Function - Hitachi ED-X12 User's Manual And Operating Manual

OPTION Menu
OPTION Menu (continued)
Item
SECURITY
48

4. Using the Transition Detector Function

While the Transition Detector function is ON, when power switch is started to
supply to the projector, it might react as below.
• Transition Detector alarm shown below might appear on screen, if the
projector has been moved or re-installed.
• Transition Detector alarm might appear on screen, if the MIRROR setting
has been changed.
• Keystone adjustment feature has been prohibited as long as the Transition
Detector function is ON.
4.1 Turning On the
4.1-1
ENTER button to display the Transition Detector
on/off menu. Select TURN ON and the current
angle, mirror and keystone setting will be recorded.
NOTE: This feature may not function properly if the projector
is not in a stable position when TURN ON is selected.
4.1-2 If this function is set to TURN ON when
the vertical angle of the projector, mirror or
keystone setting at which the projector is
turned on is different than the previously
recorded the Transition Detector Alarm will be
displayed and the projector will not display the
input signal.
Either set the Transition Detector off in the SECURITY menu or set the projector at
the recorded angle, mirror and keystone setting to display the input signal.
If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off.
This function will activate only when the projector is started after the power
switch was turned off.
Transition Detector
4.2 Setting the
4.2-1
Detector
Detector on/off menu.
4.2-2
on/off menu to select TURN ON. The ENTER
PASSWORD BOX (small) will be displayed.
4.2-3
Move the cursor to the right side of the ENTER
to display the CHECK PASSWORD BOX, enter the
same PASSWORD again.
4.2-4 Move the cursor to the right side of the CHECK
display the PASSWORD for about 20 seconds,
please make note of the PASSWORD during
this time. After the PASSWORD has displayed
for about 20 seconds the screen will return to
the Transition Detector on/off menu.
Pressing the ENTER button on the remote controll or the INPUT button on
the projector will close the PASSWORD BOX.
NOTE : Please do not forget your Transition Detector PASSWORD.
Description
Transition Detector
Function
Transition Detector
on/off menu
Transition Detector Alarm
PASSWORD
Transition
ENTER PASSWORD
BOX (small)
CHECK PASSWORD
BOX
PASSWORD BOX
Transition