Operating The Pc Screen - Hitachi CPX870D User Manual

OPERATING THE PC SCREEN

You can use the remote control as a simplified mouse or keyboard.
CAUTION Caution: Mistaken use of the mouse/keyboard control could damage your equipment.
• Only connect to a PC.
• Before connecting, read the manuals of the device you will connect.
• Do not unplug the connector cables while the computer is operating.
LASER
INDICATOR
STANDBY/ON VIDEO RGB
UP
FOCUS ZOOM PAGE
DOWN
BLANK LASER
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY VOLUME
ON
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
NOTES
• It may not be possible to control notebook PCs, and other computers with built-in pointing devices (e.g.
track balls), using this remote control. In this case, before connecting go into BIOS (system setup) and
select external mouse, and disable the pointing devices. In addition, the mouse may not function if the
computer does not have the needed utility program. See your computer's hardware manual for details.
• The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to
use the remote control, depending on the computer's configurations and mouse drivers.
• The USB control can only be used for the functions listed above. You cannot do things like press two buttons
at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).
• This function is not available while the lamp is warming up (the POWER indicator flashes green), while adjusting the volume and
display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.
26
PS/2, ADB, Serial Mouse Control
1. Turn off the projector and PC power, and connect the projector's
CONTROL terminal to the computer via the mouse cable.
2. If a USB cable is connected, disconnect it. If a USB cable is connected, the USB control
function is given priority, and mouse control from the CONTROL terminal will not function.
3. Turn on the projector power, then the computer.
The functions in the table below can be controlled. If you have difficulty with control,
restart the computer (either from the software or by pressing the restart button).
Available Functions
Move Pointer
Left click with mouse
Right click with mouse
USB Mouse/Keyboard Control
1. Connect the projector's USB terminal to a PC using a USB cable.
The functions in the table below can be controlled.
Available Functions
Move Pointer
Left click with mouse
Right click with mouse
Press the keyboard's
Press the keyboard's ENTER key
Press keyboard's PAGE UP key
Press keyboard's PAGE DOWN key
Press keyboard's ESC key
Remote Control Operation
Move using on the disk pad
Press the center
Press the right mouse button
Remote Control Operation
Move using on the disk pad
Press the center
Press the right mouse button
Press
keys
Press the ENTER button
Press PAGE UP button
Press PAGE DOWN button
Press ESC button
of the disk pad
of the disk pad