Adjusting The Projector's Elevator - Hitachi ED-X12 User's Manual And Operating Manual

Adjusting the projector's elevator

CAUTION
result in malfunction. To prevent damaging the projector and injuring yourself,
always hold the projector whenever using the elevator buttons to adjust the
elevator feet.
Do not incline the projector rightward or leftward. Also do not incline it
backward or forward exceeding 30 degrees. Exceeding these range could
cause malfunction, and could shorten the lifetime of the consumables.
horizontally.
You can use the elevator feet to make adjustments if the surface on which you
need to set the projector is uneven or if you otherwise need to adjust the angle of
projection. The adjustment range of the elevator feet is 0 to 9 degrees.
1. After making sure that the projector is cool adequately, press and hold in the
elevator buttons while holding the projector.
The elevator buttons and the elevator feet are on the both sides.
Raise or lower the projector to the desired height and release the elevator
2.
buttons.
When you release the elevator buttons, the elevator feet will lock into position.
3.
the elevator feet by hand.
Elevator feet
Elevator button
Setting up
9