Freezing The Screen; Temporarily Blanking The Screen - Hitachi ED-X12 User's Manual And Operating Manual

Operating

Freezing the screen

1.
Press the FREEZE button on the remote control.
The "FREEZE" indication will appear on the screen, and the
projector will enter the FREEZE mode.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
changes, or when one of the projector's buttons or the remote control buttons
of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME,
MUTE, KEYSTONE, POSITION, MENU, MAGNIFY and MY BUTTON is
pressed.
might possibly be printed. Do not leave the projector in the FREEZE mode for
too long.

Temporarily blanking the screen

1. Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen of
input signal. Please refer to the BLANK item in the SCREEN
37).
menu
(
To exit the blank screen and return to the input signal screen, press the
BLANK button again.
the projector's buttons or the remote control buttons is pressed or one of the
commands (except get commands) is transmitted from the control port.
22
MAGNIFY
PAGE UP VOLUME
HOME
ON
PAGE DOWN MUTE
END
OFF
FREEZE MY BUTTON KEYSTONE
1 2
SEARCH
VIDEO RGB
ASPECT AUTO BLANK
MAGNIFY
HOME PAGE UP VOLUME
ON