Hitachi CP-X608 Service Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-X608
  6. Service manual

Hitachi CP-X608 Service Manual

Multimedia lcd projector
Hide thumbs Also See for CP-X608:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
Warning
The technical information and parts shown in this
manual are not to be used for: the development,
design, production, storage or use of nuclear, chemical,
biological or missile weapons or other weapons of
mass destruction; or military purposes; or purposes that
endanger global safety and peace. Moreover, do not
sell, give, or export these items, or grant permission for
use to parties with such objectives. Forward all inquiries
to Hitachi Ltd.
Be sure to read this manual before servicing. To assure safety from fire, electric shock, injury, harmful
radiation and materials, various measures are provided in this Hitachi Multimedia LCD Projector. Be
sure to read cautionary items described in the manual to maintain safety before servicing.
1. When replacing the lamp, avoid burns to your fingers, the lamp becomes very hot.
2. Never touch the lamp bulb with a fi nger or anything else. Never drop it or give it a shock. They may
cause bursting of the bulb.
3. This projector is provided with a high voltage circuit for the lamp. Do not touch the electric parts of
power unit (circuit) and power unit (ballast), after turn on the projector.
4. Do not touch the exhaust fan, during operation.
5. The LCD module assembly is likely to be damaged. If replacing the LCD LENS/PRISM assembly,
do not hold the FPC of the LCD module assembly.
6. Use the cables which are included with the projector or specifi ed.
1. Features ------------------------------------------------------ 2
2. Specifi cations ----------------------------------------------- 2
3. Names of each part ---------------------------------------- 3
4. Adjustment --------------------------------------------------- 6
5. Troubleshooting ------------------------------------------ 13
6. Service points --------------------------------------------- 27
7. Wiring diagram -------------------------------------------- 45
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.
Multimedia LCD Projector
Caution
Service Warning
Contents
8. Disassembly diagram ----------------------------------- 56
9. Replacement parts list ---------------------------------- 65
10.RS-232C communication ------------------------------- 66
11. Block diagram --------------------------------------------- 79
12. Connector connection diagram ----------------------- 80
13.Basic circuit diagram ------------------------------------ 81
August 2006
SM0573
CP-X608
(EDX40WL)

Advertisement

Table of Contents
loading

Related Manuals for Hitachi CP-X608

Summary of Contents for Hitachi CP-X608

  • Page 1: Table Of Contents

    Be sure to read this manual before servicing. To assure safety from fire, electric shock, injury, harmful radiation and materials, various measures are provided in this Hitachi Multimedia LCD Projector. Be sure to read cautionary items described in the manual to maintain safety before servicing.

  • Page 2: Features

    CP-X608(EDX40WL) 1. Features • High Brightness • Cable-Free Presentations • Multiple Screens • Stand Alone Presentations • Remote Control Via Your Web Browser • Low Noise • Rich Connectivity 2. Specifications Drive system TFT active matrix Liquid crystal Panel size 2.0cm(0.79 type)

  • Page 3: Names Of Each Part

    CP-X608(EDX40WL) 3. Names of each part Projector HOT! (1) Speakers (x 4) (2) Focus ring (20) (3) Zoom ring (11) (4) Lamp cover The lamp unit is inside. (15) (5) Lens shift cover HOT! (6) Horizontal lens shift dial (7) Vertical lens shift dial...
  • Page 4 CP-X608(EDX40WL) Control panel (1) STANDBY/ON button (2) MENU button It consists of four cursor buttons. (3) INPUT button (4) POWER indicator (5) TEMP indicator (6) LAMP indicator Rear panel (1) Shutdown switch (2) Security slot (3) Security bar (4) AC inlet...
  • Page 5 CP-X608(EDX40WL) Remote control LASER (1) Laser pointer INDICATOR STANDBY/ON VIDEO It is a beam outlet. (2) LASER INDICATOR (3) LASER button (4) STANDBY/ON button (17) BLANK LASER (5) VOLUME button (6) MUTE button (26) (7) VIDEO button (11) (27) (8) RGB button...

  • Page 6: Adjustment

    CP-X608(EDX40WL) 4. Adjustment 4-1 Before adjusting 4-1-1 Selection of adjustment When any parts in the table 4-1 are changed, choose the proper adjusting items with the chart. Table 4-1: Relation between the replaced part and adjustment Adjustment Replaced White Color...
  • Page 7 CP-X608(EDX40WL) 4-2 Flicker adjustment (V.COM adjustment) Adjustment procedure Test pattern for the adjustment 1. Use DAC-P - V.COM - R: in the FACTORY MENU to adjust so that the flicker at the center of the screen is less than the flicker at the periphery.
  • Page 8 CP-X608(EDX40WL) 4-5 E-POS adjustment (vertical bars adjustment 2) Test pattern for the adjustment Adjustment procedure 1. Make this adjustment after completing the ad- justment in the section 4-4. 2. Use DAC -P - E-POS - R in the FACTORY MENU and use it so that vertical bars are minimized.
  • Page 9 CP-X608(EDX40WL) 4-7 Color uniformity adjustments Preparations 1. Perform these adjustments after the adjustments 5. Adjustment point No.1 should not be adjusted, described in the section 4-6. because it controls the brightness of the entire 2. Make a color uniformity adjustments for the screen.
  • Page 10 CP-X608(EDX40WL) Adjustment procedure 1 (When a color differential meter is used) Note: Since excessive correction may lead to a 1. First adjust the [MID-1] tone [G:]. correction data overview during internal 2. Select adjustment point [No.2][G:]. calculations, use the following values for When the background is not [G] monochrome, reference.
  • Page 11 CP-X608(EDX40WL) Adjustment procedure 2 (visual inspection) 1. First adjust [MIN] tone [G:]. Adjustment technique: 2. Select [No.2] [G:]. First, adjust [B:] of the point whose color is to If the background is [G] monochrome, press the be adjusted so that it approximates that of [ENTER] key on the remote control to switch to [No.1].
  • Page 12 CP-X608(EDX40WL) 4-8 Adjusting the zoom and focus Focus ring Zoom ring 1. Use the zoom ring to adjust the screen size. 2. Use the focus ring to focus the picture. 4-9 Adjusting the lens shift 1. Use the vertical lens shift knob to shift the picture upward or downward.
  • Page 14 CP-X608(EDX40WL) Power can not be turned on *: Be sure to unplug the power cord before measuring resistance. voltage Measure supplied at pins resistance* between (9),(12) and (14) of E800 on pins (9) and (14), and PWB assembly MAIN the PWB assembly MAIN in...
  • Page 15 CP-X608(EDX40WL) Lamp does not light *: Be sure to unplug the power cord before measuring resistance. What is the state of Light LAMP indicator DK03 during operation? Is the LAMP installation install the Lamp correct? Not light Is the voltage at the...
  • Page 16 CP-X608(EDX40WL) Picture is not displayed when the RGB signal is input Confirm the splash screen the LCD Panels CPC36 connector and the user menu displayed connection to the MAIN correctly? board. PWB assembly MAIN LCD/Lens prism assembly Is the picture from RGB...
  • Page 17 CP-X608(EDX40WL) No sound Check at operating mode (Make sure the state of MUTE , Volume and AUDIO-SPEAKER) Disconnect the speaker from the infinity PWB assembly Main, and Speaker measure its resistance. about 8 PWB assembly Main PWB assembly INPUT Can not control to RS-232C The check after parts change 1.
  • Page 18 CP-X608(EDX40WL) Image of the WIRELESS NETWORK UNIT is not displayed on the screen. Is the MIU port selected ? Change the port to MIU Wired ? Does the WIRELESS SD Insert the WIRELESS SD card mount on projector card into the SD card slot...
  • Page 19 CP-X608(EDX40WL) The WIRELESS NETWORK UNIT can not be communicated to PC when the WIRELESS NETWORK UNIT is in a factory default settings. Did you check above P.14 and P.18 ? Check above P.14 and P.18 Once AC power off, and wait...
  • Page 20 CP-X608(EDX40WL) Is PC LAN settings same as following ? Change PC LAN settings. CH:1, SSID:default, ENCRYPTION:off, MODE: ADHOC, SPEED:AUTO NOTE: Method of changing the PC LAN setting depends on your PC. Please read your PC manual. Is wired LAN at PC’s...
  • Page 21 CP-X608(EDX40WL) Time in not correctly displayed. DATE AND TIME is displayed as 2000/1/1 0:00 in INFORMATION on NETWORK menu. Is TIME Set the time in DIFFERENCE on Set the time. Was the time set before? DATE AND TIME on INFORMATION correct ? NETWORK menu.
  • Page 22 CP-X608(EDX40WL) Select “INFORMATION” Fig.1 Confirm Configuration Reset Key Fig.2 Reset Wireless Network Unit settings...
  • Page 23 CP-X608(EDX40WL) Fig.3-1 Select Network Menu 1. Double Click Wireless Icon 2. Click "Properties" Fig.3-2 Select Properties...
  • Page 24 CP-X608(EDX40WL) Select "Internet Protocol (TCP/IP)" 2. Click "Properties" Fig.3-3 Select TCP/IP Fig.3-4 Input IP address and Subnet mask...
  • Page 25 CP-X608(EDX40WL) Fig.4-1 Select Network Menu Right click on Networks except Right click "wired" network, "Wireless" and select "Disable" and disable it. on then. CAUTION: The networks setting picture is different from this due to OS version on PC. Fig.4-2 Disable Wired Network...
  • Page 26 CP-X608(EDX40WL) Fig.5 Wireless Network Unit Configuration Fig.6 Execute ipconfig...

  • Page 27: Service Points

    CP-X608(EDX40WL) 6. Service points 6-1 Lead free solder [CAUTION] This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions before attempting any soldering work. CAUTION Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free solder can splatter at high temperatures (600˚C).
  • Page 28 Therefore, regarding these parts, you can either replace part, LCD/Lens prism assembly, or send the whole unit LCD/Lens prism assembly back to HITACHI, where we will replace the malfunctioning part, recondition the device and send it back to you.
  • Page 29 CP-X608(EDX40WL) (4) Unscrew PWB assembly MAIN to make it free and disconnect the LCD panel flexible cables. Remove these screws Remove these 9 screws Flexible cables of LCD panel (5) Press and hold the switch S941 using an insulator during maintenance.
  • Page 30 CP-X608(EDX40WL) 3. Maintenance point Swab Each color part has same construction. By using swab and air duster, you can easily remove dust from panel and opti- cal filter. Panel Holder Optical filter 4. Cleaning the panels and optical filters (1) Turn on the set and lit on the lamp.
  • Page 31 5. Put a new battery in. “+” marking Replace battery with HITACHI MAXELL, Part No.CR2032 only. Use of another battery may present a risk of fire or explosion. Insert a new battery in the battery holder according to its minus terminal indicated in the battery holder, so that the side marked by + is facing.
  • Page 32 CP-X608(EDX40WL) 6-4-2 Potting batteries into the remote control 1. Remove the battery cover. Slide back and remove the battery cover in the direction of the arrow. 2. Insert the batteries. Align and insert the two AA batteries according to their plus and minus terminals as indicated in the remote control.
  • Page 33 CP-X608(EDX40WL) 6-5 Air filter WARNING • Before caring, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool suffi ciently. The care in a high temperature state of the projector could cause an electric shock, a burn and/or malfunction to the projector.
  • Page 34 CP-X608(EDX40WL) 6-6 Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different life- time, and some may burst or burn out soon after you start using them.
  • Page 35 CP-X608(EDX40WL) Replacing the Lamp A lamp has a fi nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after being started using.
  • Page 36 CP-X608(EDX40WL) 6-7 Lens WARNING • Before replacing the projector lens, be sure to read this manual, the “User's Manual-Safety Guide” and the “Optional Lens User's Manual” of the LCD projector for use with this lens. • Do not place the lens in a location subject to direct sunlight or other strong lighting or near heat-radiating equipment.
  • Page 37 CP-X608(EDX40WL) 6-8 Other care WARNING Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool suffi ciently. The care in a high temperature state of the projector could cause a burn and/ or malfunction to the projector.
  • Page 38 CP-X608(EDX40WL) 6-9 Notice of AUTO adjustment Use of AUTO adjustment with the image through RGB input optimizes V_POSI, H_POSI, H_SIZE and H_PHASE automatically. In case that projected image has dark tone around its peripheral, AUTO operation sometimes makes artifacts in the image, shifts capture area and so on. Those failures are caused by period of image data is not exactly distinguished to period of blanking on signal processing.
  • Page 39 CP-X608(EDX40WL) 6-10 How to inactivate the security functions This projector is equipped with security functions. (1)MyScreen PASSWORD The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten.
  • Page 40 PIN BOX (ID Inquiring Code) 2. Send HITACHI sales company the Inquiring code (10 digits) to inquire the correct PIN code. 3. With the PIN BOX menu displayed, input the correct PIN code. Enter the correct PIN CODE that HITACHI sales company informed.
  • Page 41 CP-X608(EDX40WL) 6-12 Related Messages When the unit’s power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.
  • Page 42 CP-X608(EDX40WL) 6-13 Regarding the indicator lamps Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please respond in accordance with the instructions within the table. POWER...
  • Page 43 CP-X608(EDX40WL) 6-14 HIDDEN SERVICE MENU To display the OSD for “HIDDEN SERVICE MENU” set up. HIDDEN SERVICE By the control panel By the remote control transmitter AIR-SENSOR EXECUTE 1. Display the Advanced menu by 1. Display the menu by the...
  • Page 44 CP-X608(EDX40WL) 6-16 Reset of the Network Web password / User ID, Network Control password ATTENTION : Performing this operation initializes the network settings. If the projector has the customized settings in the network, make a note of the network settings to restore them before this operation.

  • Page 45: Wiring Diagram 1

    Wiring diagram 1...
  • Page 46 Wiring diagram 2...
  • Page 47 Wiring diagram 3...
  • Page 48 Wiring diagram 4...
  • Page 49 Wiring diagram 5...
  • Page 50 Wiring diagram 6...
  • Page 51 Wiring diagram 7...
  • Page 52 Wiring diagram 8...
  • Page 53 Wiring diagram 9...
  • Page 54 Wiring diagram 10...
  • Page 55 Wiring diagram 11...

  • Page 56: Disassembly Diagram

    CP-X608(EDX40WL) 8. Disassembly diagram M : Meter Screw T : Tapping Screw [ Remove UPPER CASE ] ( See Notice 1 ) T3X12 T3X12 T3X12 [ UPPER CASE assembly ] [ Remove Network unit ] M3X6 Exhaust Duct (with FAN)
  • Page 57 CP-X608(EDX40WL) M : Meter Screw T : Tapping Screw [ Remove Duct and Power unit ] [ PANEL DUCT ] [ FILTER UNIT ] - assembly - - assembly - T3X12 - Disassembly - - Disassembly - [ Remove Panel Duct assembly ]...
  • Page 58 CP-X608(EDX40WL) Notice 1. Detach and attach the upper case. Follow the procedure below to detach and attach the upper case. When disassembling a. Remove the Lamp door. CAUTION The lamp door must be removed before the upper case when disassembling the machine. If the upper case is detached with the lamp door installed, the MAIN board might be damaged.
  • Page 59 CP-X608(EDX40WL) (2) Remove 2 screws on the front. (3) Remove the front cover. front cover 2 screws c. Remove 9 screws on the bottom and 2 screws on the rear to detach the upper case. AUX I/O SD CARD DC 5V 0.5A...
  • Page 60 CP-X608(EDX40WL) When assembling a. Tighten 9 screws on the bottom and 2 screws on the rear after attaching the upper case with the lamp door separated. In order not to make a gap between the upper and the bottom cases, tighten these screws while pressing down the upper case in the direction of the arrow.
  • Page 61 CP-X608(EDX40WL) c. Attach the Lamp door. Lamp door CAUTION Tighten this screw using a manual screwdriver. 2. Replacing the power units. Remove the screw to take off the duct. Remove the 3 screws to take off the power unit. NOTE : One of screws is behind the duct.
  • Page 62 CP-X608(EDX40WL) 3. Detaching and attaching the Panel Fan Duct assembly When disassembling Remove 6 screws and unhook the panel fan duct assembly as shown in the diagram. Panel fan duct assembly When assembling Tighten 6 screws and hook the panel fan duct assembly.
  • Page 63 CP-X608(EDX40WL) 4. Attaching the dichroic optics unit Put the dichroic optics unit on the bottom case, and tighten screws in order of 1, 2, 3 and 4 as shown in the diagram. power unit fan 5. Replacing the power unit fan Be sure to do the following works before changing the power unit fan.
  • Page 64 CP-X608(EDX40WL) 7. Assembling the power unit CAUTION Make sure that power unit board was fi xed by 4 hooks of PWB HOLDER. Make sure that it is hard to remove. Cross Section 8. Assembling the FOOT MTL Remove the remote board first when assembling the FOOT MTL.

  • Page 65: Replacement Parts List

    THE UPDATED PARTS LIST FOR THIS MODEL IS AVAILABLE ON ESTA...

  • Page 66: Rs-232C Communication

    CP-X608(EDX40WL) 10. RS-232C communication RS-232C cable(Cross) CONTROL port RS-232C port of the projector of a computer - (1) (1) CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6) (6) DSR...
  • Page 67 CP-X608(EDX40WL) Requesting projector status (Get command) (1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)+ ‘00H’+‘00H’) from the computer to the projector. (2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.
  • Page 68 CP-X608(EDX40WL) Command data chart Command Data Names Operation Type Header Action Type Setting Code Power Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00 00 60...
  • Page 69 CP-X608(EDX40WL) Command Data Names Operation Type Header Action Type Setting Code User Gamma Pattern BE EF 06 00 FB FA 01 00 80 30 00 00 9 step gray scale BE EF 06 00 6B FB 01 00 80 30...
  • Page 70 CP-X608(EDX40WL) Command Data Names Operation Type Header Action Type Setting Code COLOR TEMP GAIN B BE EF 06 00 8C F5 02 00 B3 30 00 00 Increment BE EF 06 00 EA F5 04 00 B3 30 00 00...
  • Page 71 CP-X608(EDX40WL) Command Data Names Operation Type Header Action Type Setting Code ASPECT BE EF 06 00 9E D0 01 00 08 20 00 00 16:9 BE EF 06 00 0E D1 01 00 08 20 01 00 14:9 BE EF...
  • Page 72 CP-X608(EDX40WL) Command Data Names Operation Type Header Action Type Setting Code M1-D NORMAL BE EF 06 00 3E D9 01 00 20 20 00 00 ENHANCED BE EF 06 00 AE D8 01 00 20 20 01 00 BE EF...
  • Page 73 CP-X608(EDX40WL) Command Data Names Operation Type Header Action Type Setting Code VOLUME-Component BE EF 06 00 01 CC 02 00 65 20 00 00 Increment BE EF 06 00 67 CC 04 00 65 20 00 00 Decrement BE EF...
  • Page 74 CP-X608(EDX40WL) Command Data Names Operation Type Header Action Type Setting Code BASS – MIU BE EF 06 00 85 FB 02 00 86 20 00 00 Increment BE EF 06 00 E3 FB 04 00 86 20 00 00 Decrement...
  • Page 75 CP-X608(EDX40WL) Command Data Names Operation Type Header Action Type Setting Code AUDIO - RGB2 TURN OFF BE EF 06 00 CE DC 01 00 34 20 00 00 Audio1 BE EF 06 00 5E DD 01 00 34 20 01 00...
  • Page 76 CP-X608(EDX40WL) Command Data Names Operation Type Header Action Type Setting Code IR REMOTE FREQ. BE EF 06 00 03 3C 01 00 31 26 00 00 HIGH BE EF 06 00 93 3D 01 00 31 26 01 00 BE EF...
  • Page 77 CP-X608(EDX40WL) Command Data Names Operation Type Header Action Type Setting Code MESSAGE TURN OFF BE EF 06 00 8F D6 01 00 17 30 00 00 TURN ON BE EF 06 00 1F D7 01 00 17 30 01 00...
  • Page 78 CP-X608(EDX40WL) Command Data Names Operation Type Header Action Type Setting Code MY BUTTON-2 RGB1 BE EF 06 00 C6 32 01 00 01 36 00 00 RGB2 BE EF 06 00 06 30 01 00 01 36 04 00 M1-D...

  • Page 79: Block Diagram

    Wireless PWB Controller Audio DAC SD-WLAN NIC_CPU Timer card MB93461 SDRAM Flash ROM 256Mbit 32Mbit L3E01060 L3E07110 L3E06150 Block diagram...

  • Page 80: Connector Connection Diagram

    CP-X608(EDX40WL) 12. Connector connection diagram Connector connection diagram...

  • Page 81: Basic Circuit Diagram

    CP-X608(EDX40WL) Circuit diagram list PWB assembly CONTROL PWB assembly MAIN 8 PWB assembly BATTERY PWB assembly MAIN 9 PWB assembly REMOTE PWB assembly MAIN 10 PWB assembly SW PWB assembly MAIN 11 POWER UNIT BALLAST 1 PWB assembly MAIN 12...
  • Page 82 CP-X608(EDX40WL) APU5 APUM APUP ET21 UBB-4R-D14C APL1 APL3 LL36 600 uH EL06 1608 SH-02H APL4 APL2 LL37 600 uH ET03 1608 PH-03V-D BATTERY BOARD RS232C ET01 ET02 3175-09M APRD APTD APT6 PH-05V-D USB D- USB D+ APT4 FRONT-56 FRONT-38 UP-38...
  • Page 83 CP-X608(EDX40WL) SM0573 POWER UNIT (BALLAST) SHEET 1...
  • Page 84 CP-X608(EDX40WL) SM0573 POWER UNIT (BALLAST) SHEET 2...
  • Page 85 CP-X608(EDX40WL) DC IN+ D201 C200 C108 FB105 T201 L102 L103 DC IN- IC200 D102 ICP200 R200 CN104 C202 FB106 D200 1 14.5V C201 R244 R245 R201 R111 C204 2 14.5V C203 R125 C117 C104 FB101 R202 5 ON/OFF D203 ICP202...
  • Page 86 CP-X608(EDX40WL) EC03 YKC21-4673V LC01 APC20 NFL21SP407X1C3 2125 CVBS APC21 LC02 600 uH R1(SW) APC22 1608 APC23 LC03 APC24 NFL21SP407X1C3 2125 LC09 APC51 LC04 NFL21SP407X1C3 2125 600 uH EC01 1608 APC52 ZH-09V APC1 CVBS LC05 APC25 NFL21SP407X1C3 APC2 2125 LC10 NFL21SP407X1C3...
  • Page 87 CP-X608(EDX40WL) TEMP DK02 SML-210VT RK23 QK23 1005 DTC114EUA EK01 ZH-12H RK01 APY01 KEYO-0 LAMP DK03 RK02 APY02 SML-210VT KEYO-1 RK24 APY03 QK24 DTC114EUA 1005 RK04 APY04 KEYI-0 RK05 APY05 KEYI-1 RK06 APY06 KEYI-2 RK07 APY07 QK22 RK21 LED GREEN QK21...
  • Page 88 CP-X608(EDX40WL) C2H1 C2H2 18p-C 15p-C 1005 1005 R2R8 R2N1 1.0K RESETN 1005 R215 1005 R2N2 1.0K 1.0M Q201 1005 I201 1005 DTC114EE MISC PW288B-10L R216 EMU-RESET L201 600 uH R2F0 I201 RESETB 1005 1608 R240 INPUT PORT 0 PW288B-10L 1005...
  • Page 89 CP-X608(EDX40WL) L251 65mA +3.3V 600 uH 1608 N251 R263 1.0K-1% I251 1005 S29AL016D70TFI010 I201 MAIN MEMORY PORT PW288B-10L GND1 BYTE# MVREF MREFIN0 R254 C253 C262 I252 I253 Vss-46 MREFIN1 R2E3 0.1/10 0.1/10 EDD2516AKTA-6B EDD2516AKTA-6B R266 1005 MCK0 2010 1005 1005...
  • Page 90 CP-X608(EDX40WL) 38_REAR 56_REAR I001 *I002 KSM-2003LM2EL KSM-2003LM2EL Vout Vout *C004 R001 100p-C +3.3V C001 100p-C R308 S310 1005 6.6V I301 SKHHLMA010 +6.6V S-80950CNMC-G9LT2G R311 R303 3.3V 3.3V 3.3V RESETN Q302 R309 I302 1005 DTC114EE SN74LVC1G97DCK R306 1005 1005 3.3V 3.3V...
  • Page 91 CP-X608(EDX40WL) I801 I808 SI-3010KM BD00KA5WFP-E2 L8A1,L802-805 1.2V-TG 15.5V-Panel L816 C823 4.7uH 0.033/16 +4.0V 1.8V-CPU C6-K3LA +17V +1.8VCPU FANGND 1005 I807 FAN15V TPS40222DR 3.3V-Panel 3.3V-CPU PVIN R829 (AUDIO POWER SUPPLY) L8A1 E806 APP7 C1V222-2A AVIN PH-05V 1005 3216 1.8V-CPU AUDIO +14.5V +14.5V...
  • Page 92 CP-X608(EDX40WL) I401 L401 L3E07110K0A 10uH L3E07110K0A 1/4 2518 +3.3VP +1.2V VDD1-D7 L402 C421 VDD1-D8 2.2uH 2.2/6.3 VDD1-D9 2518 VDD1-D10 HRESET0 CHHRST C422 VDD1-D11 VRESET0 CHVRST 0.01/16 VDD1-D12 HPLL CHHPLL 1005 VDD1-D13 CLP1 CHCP1 C423 R442 VDD1-E7 CLP2 CHCP2 0.01/16 VDD1-E8...
  • Page 93 CP-X608(EDX40WL) R Panel Part +3.3VP +15.5V SHCLKR SHCLKR DIRXR DIRXR ENBXR1 P501 ENBXR1 ENBXR5 54104-36HUp ENBXR5 DXOUTR DXOUTR CLXOUTR CLXOUTR DYOUTR APR36 DYOUTR CLYOUTR RLCCOM CLYOUTR LCCOM ENBYR1 APR35 ENBYR1 ENBYR2 ENBYR2 VDDY APR34 XFRR RDIRY XFRR DIRY FRPR APR33...
  • Page 94 CP-X608(EDX40WL) G Panel Part +3.3VP +15.5V SHCLKG SHCLKG DIRXG DIRXG ENBXG1 ENBXG1 ENBXG5 P601 ENBXG5 54104-36HUp DXOUTG DXOUTG CLXOUTG CLXOUTG DYOUTG APG36 DYOUTG CLYOUTG GLCCOM CLYOUTG LCCOM ENBYG1 APG35 ENBYG1 ENBYG2 ENBYG2 VDDY APG34 XFRG GDIRY XFRG DIRY FRPG APG33...
  • Page 95 CP-X608(EDX40WL) B Panel Part +3.3VP +15.5V SHCLKB SHCLKB DIRXB DIRXB ENBXB1 P701 ENBXB1 54104-36HUp ENBXB5 ENBXB5 DXOUTB DXOUTB CLXOUTB CLXOUTB DYOUTB APB36 DYOUTB CLYOUTB BLCCOM CLYOUTB LCCOM ENBYB1 APB35 ENBYB1 ENBYB2 ENBYB2 VDDY APB34 XFRB BDIRY XFRB DIRY FRPB APB33...
  • Page 96 CP-X608(EDX40WL) R186 1005 RESETN R103 R102 I2CCLK R171 1005 I2CDAT 1005 1005 R172 4.7K LPF_RGB 1005 R173 4.7K LPF OFF 1005 LPF ON R140 R187 LPF_RGB 1005 R141 1005 IN1CST R142 1005 IN1CLP 1005 GND1 V-SYNC H-SYNC R104 61 60 59 58 57 56 55 54 53 52 51...
  • Page 97 CP-X608(EDX40WL) HV_Sel Wireless(In1) VideoDecorder(In0) Buffer D+3.3V IV07 SN74LVC1G126DCK TV06 D+1.5V D+3.3V RV51 LV07 CV66 4.7uH LV06 CV69 CV67 CV68 0.1/10 2518 47uH CV07 CV08 0.1/10 0.1/10 0.1/10 1005 2518 0.1/10 10/10 1005 1005 1005 1005 1005 2125 LV01 CV81 47uH 0.1/10...
  • Page 98 APIG2 560-1% *LS11 2125 INC+ INC- QS01 RS82 SC200JT DTC114EE RGB IN 2 1005 2125 CS20 RS84 L:RGB1/H:RGB2 1005 3.0p-C For Hitachi Model APIR2 *LS12 RGB1/2 SC200JT 1005 2125 GND1 GND1 RS18 GND1 RS19 Selector IS04 RSA0 SN74LVC1G97DCK 3.3V 1005...
  • Page 99 CP-X608(EDX40WL) DG11 RB521G-30 *RGB2 3.3V 2010 3.3V *DG12 3.3V 3.3V I0RO7 RB521G-30 5.0V 3.3V 3.3V I0RO6 DDC_5V I0RO5 *RG77 3.3V 3.3V 5.0V 5.0V I0RO4 3.3V 3.3V 0.8V I0RO3 RG13 3.3V 3.3V RG73 1005 CG40 *CG21 I0RO2 3.3V 3.3V 0.01/16 1005 0.01/16...
  • Page 100 CP-X608(EDX40WL) 5.0V Parts with hatching are not mounted IW02 DS14C232CM 8.0V CW57 0.1/10 +6.6V 1005 8.0V Dout1 IW53 RW97 uPD168110 8.0V Rin1 3.3V 3.3V MODE RESETB 3.0V EW04 1005 RW04 8.0V Rout1 3.3V PH-03V 3.3V 1005 8.0V Din1 8.0V 8.0V...
  • Page 101 CP-X608(EDX40WL) 3.3V Sheet 1 Sheet 1 SP_OFF 14.5V Sheet 4 +14.5V CA99 47/25 8.5V MVK/SKV TP007 TP001 Audio Power GND 4.4V P_GND RAK0 0.0V 0.0V 8.4V 8.4V 4.4V 1005 IA01 APAL1 BD3883FS 0.0V APAR1 8.5V VIN1 REC1 8.5V QA26 QA25 8.5V...
  • Page 102 CP-X608(EDX40WL) +3.3V 1005 0.1/10 *LE03 RE71,RE72,RE73,RE74 put side-B (soldering side) Hitachi CE16 SC200JT IE03 *RE71 2125 SN74LVC1G97DCK 3.3V *LE01 OEM_ID0 *REF6 1005 3.3V SC200JT 1005 3.3V 2125 OEM_ID1 ASK_Proxima *LE04 *RE72 SC200JT Reserved(I/F) 2125 1005 *REF7 1005 Reserved(I/F) *LE06 *REH1...
  • Page 103 CP-X608(EDX40WL) (UART CN) Unmounted Unmounted / ] 0 [ / ] 1 MB93461 A / ] 5 [ B / ] 7 A / ] V / ] ] 0 [ I / ] I / ] R I Q...
  • Page 104 CP-X608(EDX40WL) MB93461 (Thermal GND) Parts indicated are not mounted SM0573 WIRELESS NETWORK BOARD SHEET 2...
  • Page 105 CP-X608(EDX40WL) Unmounted Unmounted Unmounted Unmounted Unmounted Parts indicated are not mounted SM0573 WIRELESS NETWORK BOARD SHEET 3...
  • Page 106 CP-X608(EDX40WL) Unmounted [CLK66MHz] Unmounted [+3V] Unmounted Unmounted [CLK48MHz] Unmounted Unmounted Unmounted (+15V) (GND) (+3.0V) (+6.6V) (M_RESET) (RXD1) (TXD1) (GND) (GND) (20MHz) (MSLEEP) Unmounted (SBUSY) (WL_DET) Unmounted (GND) (MAIN BOARD CN) Parts indicated are not mounted SM0573 WIRELESS NETWORK BOARD SHEET 4...
  • Page 107 CP-X608(EDX40WL) Parts indicated are not mounted SM0573 WIRELESS NETWORK BOARD SHEET 5...
  • Page 108 CP-X608(EDX40WL) [USB5V] [SD PWR] (22uH/960mA/110mW) (22uH/960mA/110mW) [xPRST] Unmounted (RED) (R-GND) (GREEN) (G-GND) (BLUE) (B-GND) (HSYNC) (VSYNC) (AUDIO-L) (AUDIO-GND) (AUDIO-R) [VDCL KOUT] Parts indicated are not mounted Unmounted SM0573 WIRELESS NETWORK BOARD SHEET 6...
  • Page 109 CP-X608(EDX40WL) (22uH/960mA/110mW) [+3.3V] (BLM21PG600SN1) (10uH/1.4A/53mW) [+15V] (3216) [GND] (BLM21PG600SN1) (22uH/960mA/110mW) [+1.4V] (BLM21PG600SN1) (22uH/960mA/110mW) [+5V] (BLM21PG600SN1) [+6.6V] (3216) (10uH/1.4A/53mW) [GND] (BLM21PG600SN1) Unmounted [GND] (3216) [GND] (3216) [GND] [GND] (3216) (3216) (3216) Unmounted Parts indicated are not mounted SM0573 WIRELESS NETWORK BOARD SHEET 7...
  • Page 110 CP-X608(EDX40WL) Unmounted Unmounted [2.5VA] Unmounted DM9010 (ORANGE) Unmounted (GREEN) Unmounted Unmounted (3216) (3216) (3216) (3216) Unmounted Unmounted (3216) [FG] Parts indicated are not mounted SM0573 WIRELESS NETWORK BOARD SHEET 8...
  • Page 111 Fax: +46 (0) 8 562 711 13 Tel: +39 02 38073415 Servizio Clienti Email: csgswe@hitachi-eu.com Fax: +39 02 48786381/2 Email: customerservice.italy@hitachi-eu.com HITACHI EUROPE S.A.S HITACHI EUROPE LTD (Norway) AB Lyon Office STRANDVEIEN 18 B.P. 45, 69671 BRON CEDEX 1366 Lysaker FRANCE...

This manual is also suitable for:

Edx40wl

Table of Contents