Connecting The Speakers; Connecting Auxiliary Equipment (Aux In); Connecting Auxiliary Equipment (Line Out); Connecting Control Cable - Hitachi AX-M131U Operating Instructions Manual

Connecting the Speakers

Connect the speaker cords between the terminals as shown below.
Connect the cords with a silver line to the (-) (G) terminals and cords with a gold line to the (+) (L)
(R) terminals.

Connecting Auxiliary Equipment (AUX IN)

This unit also has one group of audio input terminals, you can use signal line to connect this unit's
audio input terminals and assistance equipment's audio output terminals respectively, then you can
hear the sound sources.

Connecting Auxiliary Equipment (LINE OUT)

This unit also has one group of audio output terminals, you can use signal line to connect this unit's
audio output terminal and assistance equipment's audio input terminal respectively, then you can
output the outer sound sauces to other assistance equipment.

Connecting Control Cable

Connecting the AC Power Cord

Insert the AC power cord into a wall outlet, and your system is at your command!
Caution: Be sure to unplug the power cord from the outlet when going out or when the system is
not in use for an extended period of time.

Connecting the Headphones

Connect a pair of headphones to the phones jack. No sound comes out of the speakers.
Note: Be sure to turn down the volume before connecting or putting on headphones.
Connect the control cable between the CD player and the
amplifier.
- 4 -