Connections; Speaker Connections; Using The Aux Connection; Connecting The Aerial - Hitachi AXM8410C Instruction Manual

Connections

Speaker Connections

Connect the speaker cables at the back of the
speakers to the SPEAKER OUT (L/R) Sockets at the
rear of the unit.

Using the AUX Connection

Use a RCA stereo audio cable to connect an
auxiliary equipment to the main unit's AUX in
sockets.
Auxiliary Equipment
RCA stereo audio cables

Connecting the Aerial

Connect one end of the aerial cable (included)
to the FM socket at the rear of the unit. Then
position the aerial to obtain optimum reception.
(Not included)

Connecting to the Mains Supply

• This unit is designed to operate with an AC
230V ~50Hz power supply.
• Connecting the unit to any other power
source may cause damage to the unit.
Unwind the mains cable to its full length.
Connect the mains plug to a mains socket.
Make sure the mains plug is fully inserted
into the mains socket. The unit is now
connected and ready to use.
• To switch the unit off completely, remove the
mains plug from the mains socket.
Ensure all connections are connected before
connecting to the mains power socket.

Playing MP3's from a USB Device

When a USB device is connected to the unit, tap
icon repeatedly on the unit or the USB
the
button on the remote control to select the USB
mode.
• The unit can only play MP3 and WMA file
formats in USB operation.
• If your USB device is loaded with MP3's but
the display keeps showing 'NO DATA" on the
display, the format of your USB device might
not be compatible with the unit.
• The unit may not be compatible with all
USB devices, this is not an indication of a
problem with the unit.
11