Fm Radio - Hitachi AX-M131U Operating Instructions Manual

6. Time and Date (month day hour minute) shall display the following:
7. Audio type and bit rate – the audio type (Stereo, Mono) shall be right justified, and the bit rate shall
be left justified.
8. If the Cancel button is pressed, the information text shall revert to Service name.
Preset buttons
1. When a program button is pressed, it will display the following:
Where "N" is the preset number, press Program again or press number key, and the current
service will be saved to the preset. Then it will display the following for 2 seconds.
When a number button is pressed, if there is a service associated with the preset, a tune
operation to the service shall be performed. If there is no service associated with the preset, the
receiver shall display the following( where "N" is the preset number) for 2 seconds:

FM Radio

You can listen to FM stations. Stations can be tuned in manually, automatically, or from preset
memory storage.
Caution: Before listening to the radio, please check that both the FM antennas are correctly
connected and adjusted for length and direction.
Tuning in a Station
1. Repeatedly press the function button (FUNCTION) on the front of the unit or press the tuner
function button (TUNER) on the remote control (under the number buttons).
2. Press the tuner function button (TUNER) on the remote control to select the band or the band
button on the top of the unit.
3. Select a station using one of the following methods.
Manual Tuning
Press the tuning backward button (TU-) or tuning forward button (TU+) repeatedly to change the
frequency until you find the station you want.
Auto Tuning
If you press and hold the tuning backward button (TU-) or tuning forward button (TU+) on the unit
or remote control for one second or more, the frequency changes down, or up, automatically
until a station is found.
Preset Tuning (Possible only after presetting stations)
Press the channel select backward button (CH-), channel select forward button (CH+) on the
remote control to select the desired preset number. Its band and frequency are displayed on the
VFD.
MM-DD HH:MM
P N
PN SAVED
PN EMPTY
- 10 -