Connections; Connect To Am Antenna; Connecting The Speakers; Connecting Control Cable - Hitachi AX-M70MP3 Instruction Manual

Connections

Connections Connections
Connections Connections
C a u t i o n : Turn off all of the unit power sources before connection. C a u t i o n : C a u t i o n : C a u t i o n : C a u t i o n :
Make all connections before plugging the system into an AC power outlet.

Connect to AM antenna

Connect to AM antenna Connect to AM antenna
Connect to AM antenna Connect to AM antenna

Connecting the Speakers

Connecting the Speakers
Connecting the Speakers Connecting the Speakers Connecting the Speakers
Connect the speaker cords between the terminals as shown below.
Connect the cords with a silver line to the (-) (G) terminals and cords with a gold line to the (+)
(L) (R) terminals.

Connecting Control Cable

Connecting Control Cable Connecting Control Cable Connecting Control Cable Connecting Control Cable
Connect the control cable to the CD player, the amplifier and the radio via connection on the
rear of the units as shown below:
CD Terminals Board
AM loop antenna
a. Open the AM antenna terminals on the rear of the unit.
b. Attach the AM loop to its base by snapping the tabs on the
loop into the slot in the base.
c. Close each of the terminals to connect the antenna securely.
Rotate AM ring shape antenna till the receiving effect is the best.
(Don't place the AM ring shape antenna on the unit cover, or it
will affect the receiving effect.)
Spectrum Terminals Board
- 5 -
Amplifier Terminals Board