Connection; Connect To The Tv; Connecting The Speakers - Hitachi AX-M910 Instruction Manual

Connection

Caution: Please turn off all the equipment power before connecting.

Connect to the TV

Connecting diagram
Terminal board for the DVD player
Connections to TV
* Please refer to Page17 for setup details of different outputs.

Connecting the Speakers

Connect the speaker cords between the terminals as shown below.
Right Speaker Box
Back View
Connection precautions
1. The unit's output has wide dynamic range, so the amplifier's volume should be moderated, if other
speakers are used, they must be chosen correctly according to our speaker's specification, or the
loud speaker will be damaged by the heavy volume.
2. Before turning on/off the unit, please turn the volume to minimum so as to avoid damages to the
loudspeakers.
Connection precautions
1. This unit has video and S terminal output modes,
please choose one to connect with the TV
terminal. (Use S terminal output to get clearer
picture.)
2. If your TV has component input terminal, then
you can use the signal connecting cable to
connect with the unit's component output
terminal. By doing so, the picture will be more
clear.
3. To avoid affecting the picture output, don't
connect video, S terminal, component cables at
the same time.
4. DVD Player setting
TV
Some settings should be made for the unit
according to the TV connection.
* According to the colour system setting of TV,
select the colour system in the "TV DISPLAY"
function setting.
* If the unit is connected to a wide screen TV, then
set the "TV DISPLAY" to "WIDE" in the function
setting menu.
* If the unit is connected to a TV, then set "TV
DISPLAY" to "NORMAL/PS" or "NORMAL/LB" in
the function setting item.
- 8 -
Left Speaker Box
Back View