Setting The Daily On Timer; Disc Handling - Hitachi AX-M131U Operating Instructions Manual

Table of Contents

Advertisement

To cancel the sleep timer setting
Repeatedly press the sleep button (SLEEP) on the remote control until the "00" is displayed.
Turning off the system also cancels the sleep timer.

Setting the Daily on Timer

You can use the setting timer to make the unit automatically turn on at a certain time everyday from
standby. When the setting timer is on, the timer indicator " " will be displayed. But the clock must be
correctly set for the timer to operate correctly.
1. In standby mode, press the timer button (TIMER) on the remote control twice, the hour indicator
will blink.
2. Set the hour with the volume down button (VOL-) or volume up button (VOL+).
3. Press the timer button (TIMER) on the remote control, the minute indicator will blink.
4. Set the minute with the volume down button (VOL-) or volume up button (VOL+).
5. Press the timer button (TIMER) on the remote control, the selected time is set. Then set the daily
timer to "ON" (daily timer set is in effect) or "OFF" (daily timer set is to cancel) by pressing the
volume down button (VOL-) or volume up button (VOL+).
Caution:
* You can set the daily timer only in standby mode.
* The operating time of every step shouldn't be longer than 3 seconds or it will return to time
display.
* The sound source on the automatic on mode is the same as the sound source the last time, the
unit was turned off by the standby switch.
* The volume automatically comes on at level 8.
To confirm the daily time
When you press the timer button (TIMER) on the remote control in standby mode, the daily time is
displayed. Wait for a few seconds until the display returns to the time display.
To cancel the daily timer setting
Repeat the previous steps for setting the daily timer until "OFF" is displayed.
Turning off the system also cancels the daily timer.

Disc Handling

1. To keep the disc clean, please don't touch the disc's surface when you are holding it. You should
hold the edge. (See fig. 1)
2. If the disc is dirty, it will affect the sound quality. Please use a clean and soft cloth to wipe the
disc from inside to outside. Don't wipe the disc in a circular direction. (See fig. 2)
3. Don't stick paper on the disc.
4. Don't put the disc in a place with direct sunshine or hot sources.
5. Do not play any damaged discs in this player.
6. When you have finished playing a CD, remove it from the CD player and store in its protector
cover.
Fig.1
Fig.2
- 15 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents