Connection; Connect To The Tv; Connecting The Speakers; Connecting The Antenna - Hitachi AX-M140 Instruction Manual

Connection

Caution: Please turn off all the equipment power before connecting.

Connect to the TV

Connecting diagram
Terminal board for the DVD player
DIGITAL OUTPUT VIDEO
MONITOR
VCR SCART INPUT
COAXIAL
OPTICAL DVD S-VIDEO
TV SCART OUTPUT
Connections to TV

Connecting the Speakers

Connecting the Antenna

Tighten the antenna rod
clockwise on the base of
the antenna.
Safety precautions
Some settings should be made for the unit
according to the TV connection.
CONTROL CABLE
* According to the colour system setting of TV,
select the colour system in the "TV Display"
function setting.
* If the unit is connected to a wide screen TV, then
set the "TV display" to "Wide" in the function
setting menu.
* If the unit is connected to a TV, then set "TV
TV
display" to "Normal/PS" or "Normal/LB" in the
function setting item.
Connect the speaker cords between the terminals
as shown below.
Connect the cords with a silver line to the (+) (L) (R)
terminals and cords with a gold line to the (-) (G)
terminals.
Connection precautions
1. This unit has a high power output and wide
dynamic range. If speakers other than those
2. Before connecting or removing mains power,
* The antenna should be connected to the antenna socket, tighten the
antenna by hand with tool supplied. (Please note: Do not overtighten,
this could damage the antenna or it's fittings.)
* Position the antenna for the best reception.
Warning: The antenna supplied has a magnetic base. It must not be
placed on any products that are sensitive to magnetism, such
a TV's and computers as this may cause damage.
- 5 -
supplied are used, they must be chosen
according to speaker specification, or the
speakers may be damaged.
please turn off the power on the unit and turn
the volume to minimum or it may damage the
speakers.