Connections; Connecting The Antenna - Hitachi AX-M131U Operating Instructions Manual

DON'T allow electrical equipment to be exposed to dripping or splashing, or objects filled with
liquids, such as vases, to be placed on the equipment and don't handle the power cord with
wet hands.
DON'T place hot objects or naked flame sources such as lighted candles or nightlights on, or close
to equipment. High temperatures can melt plastic and lead to fires.
DON'T use makeshift stands and NEVER fix legs with wood screws - to ensure complete safety
always fit the manufacturer's approved stand or legs with the fixings provided according
to the instructions.
DON'T listen to headphones at high volume, as such use can permanently damage your hearing.
DON'T leave equipment switched on when it is unattended unless it is specifically stated
that it is designed for unattended operation or has a stand-by mode. Switch off using the
switch on the equipment and make sure that your family knows how to do this. Special
arrangements may need to be made for infirm or handicapped people.
DON'T continue to operate the equipment if you are in any doubt about it working normally, or if it
is damaged in any way - switch off, withdraw the mains plug and consult your dealer.
ABOVE ALL,
NEVER let anyone especially children push anything into holes, slots or any other opening in the
case - this could result in a fatal electrical shock.
NEVER guess or take chances with electrical equipment of any kind...it is better to be safe than
sorry!

Connections

Caution: Make all connections before plugging the system into an AC power outlet.

Connecting the Antenna

..................................
Using the supplied wire Antenna
A antenna connector should be connected to the antenna socket,
tighten the antenna by hand or tool.
Adjust the antenna length and direction to optimise reception.
- 3 -