Hitachi AX-M131U Operating Instructions Manual page 10

5. When the scan is complete, a tune operation to the first service of the first ensemble in the
ensemble list shall be preformed.
6. If the service database is still empty after a scan, the receiver shall display the following:
Manual tune
1. The receiver shall display the following for 2 seconds:
After this time, the receiver shall display the current DAB channel and frequency
If the up or down buttons are pressed, the receiver shall step forwards or backwards through
the full range of channels.
2. If the select button is pressed, the first service for the current ensemble shall be selected, the
receiver shall return to this idle state.
Info button
1. If the info button is pressed, the information text displayed during the idle process shall step
through each of the following:
2. DLS-this shall scroll from right to left at approximately 4 characters per second.
Where no DLS information is available, the receiver shall display the following:
3. Programme type, if the Programme type is less than 10, it shall display the following, if the
Programme type is larger than 10, it shall scroll from right to left at approximately 4 characters per
second.
if no PTY is available, the receiver shall display the following:
4. Ensemble Name- this shall be left justified.
5. DAB channel and frequency
NO SIGNAL
MANUAL TUN
12B 225 648
Scroll DLS
NO DLS
Program Type
NO PTY
Ensemble~8
12B 225 648
- 9 -