Marantz AV7005 User Manual page 90

ENGLISH DEUTSCH
Manual Setup
Setting items
Display ON : Display is always on.
Set the display on/off Display Auto OFF : Display is off except
setting. when showing the status display.
Display OFF : Display is always off.
This can also be set by pressing
DISPLAY
.
Each time
setting is changed as shown below.
ON
Setup Lock ON : Turn protection on.
Protect settings from OFF : Turn protection off.
inadvertent change.
When canceling the setting, set "Setup Lock" to "OFF".
NOTE
When "Setup Lock" is set to "ON", the settings listed below can no
longer be changed. Also, "SETUP LOCKED!" is displayed if you attempt
to operate related settings.
· Menu operations
· M-DAX
· Dynamic Volume ®
Maintenance Mode
NOTE
Use when receiving
Only use this function if so instructed by a Marantz serviceperson or
maintenance from a Marantz
installer.
service engineer or custom
installer.
86
Remote control operation
buttons
FRANÇAIS ITALIANO ESPAÑOL
Setting details
DISPLAY
is pressed, the
Display Auto Off
Display OFF
· Channel Level
· MultEQ ® XT
· Dynamic EQ ®
Move the cursor
(Up/Down/Left/Right)
NEDERLANDS SVENSKA
Setting items
Firmware Update Check for Update : Check for firmware updates. You can also check
Update the firmware of this approximately how long it will take to complete an update.
unit. Start : Execute the update process.
When updating starts, the power indicator becomes red and the menu
screen is shut down. The amount of update time which has elapsed is
displayed.
When updating is complete, the power indicator becomes green and
normal status is resumed.
• If updating fails, the set automatically retries, but if updating is still not
possible, one of the messages shown below is displayed. If the display
reads as shown below, check the settings and network environment,
then update again.
Display
Updating fail
Login failed
Server is busy
Connection fail
Download fail
Add New Feature Upgrade : Execute the upgrade process.
Display new features that When updating starts, the power indicator becomes red and the menu
can be downloaded to this screen is shut down. The amount of update time which has elapsed is
unit and perform an update. displayed.
When upgrading is complete, the power indicator becomes green and
normal status is resumed.
• If the upgrade is not successful, an error message identical to those in
"Firmware Update" will appear on the display. Check the settings and
network environment, then update again.
Upgrade Status : Display a list of the additional functions provided by the
upgrade.
See the Marantz website for details about updates.
When the procedure is complete, "Registered" is displayed in this
menu and updates can be carried out. If the procedure has not been
carried out, "Not Registered" is displayed.
The ID number shown on this screen is
needed when carrying out the procedure.
The ID number can also be displayed by
pressing and holding
least 3 seconds.
Confirm the setting
Setting details
Description
Updating failed.
Failure to log into server.
Server is busy. Wait a while then try again.
Failure in connecting to server.
Downloading of the firmware has failed.
RETURN
o and for at
Return to previous menu