Marantz AV7005 User Manual page 55

Front A/B connection
A second set of front speakers can be connected to the
UNBALANCED PRE OUT HL/HR terminals on the power amp.
In this case, perform the settings using the
the remote control or main unit (vpage 26 "Set the front speakers
to be used").
SW
FL(B) FL(A) FR(A)
For surround playback of a multichannel source, if you connect
the center speaker, surround speakers, surround back speakers
(or front wide speakers) and subwoofers, 7.1-channel playback is
available.
Front speakers can be used separately, depending on the
speaker's specifications or playback source such as front speakers
(A) for multichannel playback and front speakers (B) for 2-channel
playback.
SVENSKA NEDERLANDS
2.1-channel connection
SPKR A/B
button on
FL
GMM7055H
FR(B)
n For connecting four subwoofers
Four subwoofers can be connected to this unit.
The same signal is output from each subwoofer terminal.
For speaker impedance and speaker cable connections, see power amp user guide.
ESPAÑOL ITALIANO
UNBALANCED
BALANCED
GMM7025H
SW FR
FRANÇAIS DEUTSCH
Bi-Amp connection
A bi-amp connection is to connect separate amplifiers to the tweeter
terminals and woofer terminals of speakers compatible with the bi-amp
function. This prevents the back electromotive force (returned force without
output) of the woofer sent to the tweeter, which affects the sound quality of
the tweeter, and you can enjoy playback with higher-quality sound.
In this case, set "Set up "Amp Assign"" (vpage 52) to "SPKR-C".
FL
q w
(L)
When a Bi-Amp connection is used, the same signal is output from the
UNBALANCED and BALANCED PRE OUT FL/FR and SBL/SBR terminals.
For surround playback of a multichannel source, if you connect the center
speaker, surround speakers and subwoofers, 5.1-channel playback is
available.
NOTE
• Use speakers compatible with bi-amp connections.
• When making bi-amp connections, be sure to remove the short-circuiting
plate or wire between the speaker's woofer and tweeter terminals.
ENGLISH
Connect
GMM7055H
FR
q w
(R)
51