Marantz AV7005 User Manual page 73

Setting items
HDMI HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6
Set this to change the HDMI None : Do not assign an HDMI input connector to the selected input
input connectors assigned source.
to the input sources.
• At time of purchase, the settings of the different input sources are as
BD DVD VCR shown below.
Input
SAT GAME AUX1
source
TV
Default
HDMI 1 HDMI 2 HDMI 4
setting
• An input source to which an HDMI input connector cannot be assigned
is displayed as "– – –".
• To play the video signal assigned at "HDMI" combined with the audio
signal assigned at "Input Assign" – "Digital", select "Digital" at "Input
Mode" (vpage 71).
• The audio signals input from the analog and digital connectors are not
output to the monitor.
• When "HDMI Control" (vpage 80) is set to "ON", HDMI input connector
cannot be assigned to "TV".
Digital Coax1 – 2 (COAXIAL) / Opt1 – 3 (OPTICAL)
Set this to change the digital None : Do not assign a digital input connector to the selected input source.
input connectors assigned
• At time of purchase, the settings of the different input sources are as
to the input sources.
shown below.
BD DVD VCR
Input source
SAT GAME AUX1
Default
TV CD CDR
setting
SIRIUS
Input source
Default
setting
Remote control operation
buttons
SVENSKA NEDERLANDS
Setting details
BD DVD VCR SAT GAME AUX1
HDMI HDMI HDMI
3 5
BD DVD VCR SAT GAME
Coax Coax
None None None
1 2
TV CD CDR SIRIUS
Opt Opt
None None
1 2
Move the cursor
(Up/Down/Left/Right)
ESPAÑOL ITALIANO
Setting items
Component
Set this to change the
component video input
connectors assigned to the
input sources.
BD DVD VCR
TV
SAT GAME AUX1
TV
None
6
Default
The "Input Assign" settings
are returned to the default
settings.
Video
Set the source video.
z "GAME" or "TV" can be set when "HDMI" (vpage 69) or "Component" (vpage 69) has been
assigned.
Setting items
AUX1
Video Select
Opt
Video of another input
3
source is played back
combined with the playing
audio.
Confirm the setting
FRANÇAIS DEUTSCH
Setting details
1-RCA / 2-RCA / 3-RCA / 4-RCA (Component video)
None : Do not assign a component video input connector to the selected
input source.
• At time of purchase, the settings of the different input sources are as
shown below.
Input
BD DVD VCR SAT
source
Default
1-RCA 2-RCA 4-RCA 3-RCA
setting
An input source to which an component video input connector cannot be
assigned is displayed as "– – –".
Yes : Reset to the defaults.
No : Do not reset to the defaults.
ENTER
If you select "Default" and press
Setting?" is displayed. Select "Yes" or "No", and then press
Default settings are underlined.
Setting details
Source : Play the picture and sound of the input source.
BD / DVD / VCR / SAT / GAME / AUX1 / TV : Select video input source to
view. This can be set for individual input sources.
"GAME" and "TV" can be selected only when a component video is
assigned as an input source.
NOTE
• It is not possible to select HDMI input signals.
• Input sources for which "Delete" is selected
at "Source Delete" (vpage 84) cannot be
selected.
V.SEL
• This can also be set by pressing on the
remote control unit.
Return to previous menu
ENGLISH
Input Setup
GAME AUX1 TV
None None None
, the message "Default
ENTER
.
69