Marantz AV7005 User Manual page 79

Setting items
Dynamic Volume ®
Heavy : Most adjustment to softest and loudest sounds.
Solve the problem of large Medium : Medium adjustment to loudest and softest sound.
variations in volume level Light : Least adjustment to loudest and softest sounds.
between TV, movies and OFF : Do not use "Dynamic Volume".
other content (between
quiet passages and
• is displayed when set to "ON".
loud passages, etc.) by
automatically adjusting to
• If "Dynamic Volume" is set to "Yes" in Auto
the user's preferred volume
Setup (vpage 11), the setting is automatically
setting.
changed to "Heavy".
• Buttons on the remote control unit or main unit
can be used for operations.
DYN EQ/VOL
Press
DYN EQ/VOL
Each time
changed as shown below.
Dynamic EQ : ON
Dynamic Volume : Heavy
Dynamic EQ : OFF
Dynamic Volume : OFF
n A-DSX Soundstage
Adjust Audyssey DSX™ setting and sound stage parameters.
Setting items
Audyssey DSX ON-Height- : Turn on A-DSX processing for height
Provides more immersive expansion.
surround sound by adding ON-Wide- : Turn on A-DSX processing for wide
the new channels. expansion.
OFF : Do not set Audyssey DSX.
• This can also be set by pressing
• The
Remote control operation
buttons
SVENSKA NEDERLANDS
Setting details
.
is pressed, the setting is
Dynamic EQ : ON
Dynamic Volume : Medium
Dynamic EQ : ON Dynamic EQ : ON
Dynamic Volume : OFF Dynamic Volume : Light
Default settings are underlined.
Setting details
A-DSX
.
indicator illuminates on the display.
Audyssey DSX : ON -Height-
OFF Audyssey DSX : ON -Wide-
Move the cursor
(Up/Down/Left/Right)
ESPAÑOL ITALIANO
Setting items
Stage Width –10 – +10 (0)
Adjust sound stage width
when using front wide
speakers.
Stage Height –10 – +10 (0)
Adjust sound stage height
when using front height
• "Audyssey DSX" can be set when you are using front height speakers
speakers.
or front wide speakers.
• "Audyssey DSX" is only valid when using a center speaker.
• "Audyssey DSX" is only enabled when the listening mode is set other
than STEREO, PLgz Height, MULTI CH STEREO, NEURAL, DOLBY VS,
DIRECT, PURE DIRECT.
• "A-DSX Soundstage" cannot be configured if the HD Audio source being
played includes Front height and Front wide channels. In this case, the
respective channels are played back using the input signals.
About Audyssey Dynamic Surround Expansion (A-DSX)
Audyssey DSX is a scalable surround expansion system that adds
new channels to improve the surround impression. Based on research
in human hearing Audyssey DSX adds a pair of Wide channels in the
front because that information is critical in the rendering of a realistic
soundstage.
Audyssey DSX then adds a pair of Height channels above the main
front channels to reproduce the next most important acoustical and
perceptual cues related to soundstage depth. In addition to creating
these new channels, Audyssey DSX applies Surround Envelopment
Processing to enhance the blend between the front and side/back
surround channels. The result is a much more seamless and enveloping
home theater experience.
Confirm the setting
FRANÇAIS DEUTSCH
Audio/Video Adjust
Setting details
Return to previous menu
ENGLISH
75