Marantz AV7005 User Manual page 16

ENGLISH DEUTSCH
Parameter Check
This function enables you to check the measurement results and
equalizer characteristics after Audyssey Auto Setup.
1
Use to select "Parameter Check" and then
ui
ENTER
press or .
p
2
Use to select the item you want to check, then
ui
press ENTER or .
p
Measurement results for each speaker are displayed.
AUTO SETUP
PARAMETER CHECK
Speaker Config Check
Distance Check
Channel Level Check
Crossover Check
EQ Check
Restore
Show speaker configuration result
Check the speaker confi guration.
Speaker Confi g. Check
Check the distance.
Distance Check
Check the channel level.
Channel Level Check
Check the crossover frequency.
Crossover Check
Check the equalizer.
EQ Check
ui
• If "EQ Check" is selected in step 2, press
curve ("Audyssey" or "Audyssey Flat") to be checked.
Use o p to switch the display between the different speakers.
3
Press RETURN .
The confi rmation screen reappears. Repeat steps 2.
Retrieving Audyssey Auto Setup settings
If you set "Restore" to "Yes", you can return to Audyssey Auto Setup
measurement result (value calculated at the start by MultEQ ® XT)
even when you have changed each setting manually.
12
Remote control operation
buttons
FRANÇAIS ITALIANO ESPAÑOL
5
Play back disc
1
Press BD two times in a row
to switch an input source for a
player used for playback.
2
Play the component connected to
this unit.
Make the necessary settings on the
player (language setting, subtitles
setting, etc.) beforehand.
3
Adjust the sound volume.
VOLUME + ..................................... Volume up
VOLUME – ................................ Volume down
MUTE .................................................. Muting
4
Set the listening mode.
Set the listening mode according to the playback contents
(cinema, music, etc.) or according to your liking (vpage 44
"Selecting a listening mode (Surround mode)").
to select equalizing
Move the cursor
(Up/Down/Left/Right)
NEDERLANDS SVENSKA
When power is switched to standby
STANDBY
Press
GPower indicator status in standby modeH
• Normal standby : Red
• When "HDMI Control" is set to "ON" :
Orange
• When "Network Standby" is set to "ON" :
Orange
You can also switch the power to standby by
pressing
NOTE
During power standby, a minimal amount of power is consumed. To
totally cut off the power, remove the power cord from the power
outlet.
Confi rm the setting
1
.
ON/STANDBY
on the main unit.
Return to previous menu
2 3 4 5