Marantz AV7005 User Manual page 89

Setting items
GUI Wall Paper : Set wallpaper to display in the background when playback
(Continued) is stopped, etc.
• Picture : Set the background to a picture (Marantz logo).
• Black : Set the background to black.
Format : Set the video signal format to be output for the TV you are using.
• NTSC : Select NTSC output.
• PAL : Select PAL output.
"Format" can also be set by the
following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit's
RETURN
and
"Video Format" appears on the
display.
o p
2. Press
format.
3. Press the main unit's
RETURN
or to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Text : Display the details of operation when switching surround mode,
input mode, etc.
• ON : Turn display on.
• OFF : Turn display off.
Master Volume : Display the master volume during adjustment.
• Bottom : Display at the bottom.
• Top : Display at the top.
• OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
NET/USB : Set the NET/USB screen display time when the input source
is "NET/USB".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
Remote control operation
buttons
SVENSKA NEDERLANDS
Setting details
A-DSX
for at least 3 seconds.
and set the video signal
ENTER MENU
,
Move the cursor
(Up/Down/Left/Right)
ESPAÑOL ITALIANO
Setting items
GUI TUNER : Set the tuner screen display time when the input source is
(Continued) "SIRIUS" or "HD Radio".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
iPod : Set the iPod screen display time when the input source is "NET/
USB".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
Component 2 Output MAIN ZONE : Use the component 2 output terminal as a monitor output
Set whether to use the for MAIN ZONE.
component 2 output ZONE2 : Use the component 2 output terminal as a monitor output for
terminal as MAIN ZONE or ZONE2.
ZONE2.
Zone Rename • Up to 10 characters can be input.
Change the display title of • For character input, see page 65.
each zone to one you prefer.
Trigger Out Trigger Out 1 / Trigger Out 2
Select the condition for
n When setting for zone (MAIN ZONE / ZONE2 / ZONE3)
activating Trigger Out 1/2 for
Trigger out is activated through linkage to the power of the zone set
the input source, surround
to "ON".
mode, etc.
n When setting for input source
See "DC OUT (TRIGGER
Activate trigger out when the input source set to "ON" is selected.
OUT) jacks" (vpage 54) for
more information on trigger
Active for the zone set to "ON" with "When Setting for Zone".
out.
n When setting for HDMI monitor
Activate trigger out when the HDMI monitor set to "ON" is selected.
Active when the "MAIN ZONE" set to "ON" with "When Setting
for Zone" is selected, and when the input source set to "ON" with
"When Setting for Input Source" is selected.
• ON : Activate trigger on this mode.
• – – – : Do not activate trigger on this mode.
Default : The "Trigger Out" settings are returned to the default settings.
• Yes : Reset to the defaults.
• No : Do not reset to the defaults.
Confirm the setting
FRANÇAIS DEUTSCH
Manual Setup
Setting details
Return to previous menu
ENGLISH
85