Installing The Usb Touch Driver; Installing The Usb Touch Driver For Windows; Xp, 2000, Me And 98 - Elo TouchSystems Entuitive 1825L Series User Manual

Installing the USB Touch Driver

Installing the USB Touch Driver for Windows XP,
Windows 2000, Me and 98
Insert the Elo CD-ROM in your computer's CD-ROM drive.
1
If Windows 98, Windows Me or Windows 2000 starts the Add New
Hardware Wizard:
Choose Next. Select "Search for the best driver for your device
2
(Recommended)" and choose Next.
When a list of search locations is displayed, place a checkmark on "Specify a
3
location" and use Browse to select the \EloUSB directory on the Elo
CD-ROM.
Choose Next. Once the Elo TouchSystems USB touchscreen driver has been
4
detected, choose Next again.
You will see several files being copied. Insert your Windows 98 CD if
5
prompted. Choose Finish.
If Windows 98, Windows Me or Windows 2000 does not start the Add New
Hardware Wizard:
N : For Windows 2000 you must have administrator access rights to install the driver.
OTE
Insert the Elo CD-ROM in your computer's CD-ROM drive.
1
If the AutoStart feature for your CD-ROM drive is active, the system
automatically detects the CD and starts the setup program.
Follow the directions on the screen to complete the driver setup for your
2
version of Windows.
If the AutoStart feature is not active:
Click Start > Run.
1
2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
Click Open, then OK to run EloCd.exe.
3
4 Follow the directions on the screen to complete the driver setup for your
version of Windows.
To install Windows 2000 and Windows XP, you must use the "update driver" method;
you will not find a setup.exe file within the download.
2-17