Related Manuals for Elo TouchSystems Entuitive 1727L Series
Summary of Contents for Elo TouchSystems Entuitive 1727L Series
- Page 1 ELO Entuitive Touchmonitor User Guide For 17" LCD Desktop Touchmonitors 1725L/1727L Series Revision A...
-
Page 2: User Guide
Elo Entuitive Touchmonitor User Guide 1 " LCD Desktop Touchmonitor 1 2 L Series Revision P/N 0085 Elo TouchSystems, Inc. 1-800-ELOTOUCH www.elotouch.com... -
Page 4: Trademark Acknowledgments
Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems makes no representations or warranties with respect to the contents hereof, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo TouchSystems reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Elo TouchSystems to notify any person of such revisions or changes. -
Page 6: Table Of Contents
Table of Contents Chapter 1 Introduction Precautions ....1 About the Product ....1 Chapter 2 Installation and Setup Unpacking Your Touchmonitor. -
Page 8: Introduction
Congratulations on your purchase of an Elo TouchSystems Entuitive touchmonitor. Your new touchmonitor combines the reliable performance of Elo’s touch technology with the latest advances in LCD display design. This combination of features creates a natural flow of information between a user and your touchmonitor. - Page 9 Spanish, • Serial or USB touch interface (USB requires Windows 98, 2000, Me and XP.) • • Patented touch technology of Elo TouchSystems • VESA DDC 1/2B data communication • VESA DPMS power saving • Stand with minimum • Cable management device •...
-
Page 10: Installation And Setup
This chapter discusses how to install your LCD touchmonitor and how to install Elo TouchSystems driver software. Unpacking Your Touchmonitor Check that the following LCD Display Software User Guide-on CD, Quick Install Guide and software CD NSTALLATION AND HAPTER items are present and in good condition:... -
Page 11: Product Overview
Product Overview Main Unit Rear View E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e LCD Display Stand... -
Page 12: Side View
Side View User Controls Base Bottom View Key hole for M5 screw 4X thread M5x0.8... -
Page 13: Cable
Serial CONNECTIONS ON UNDERSIDE POWER SPEAKER FEMALE DVI-D FEMALE 15-PIN FEMALE 9-PIN SERIAL VIDEO CONNECTOR TOUCHSCREEN CONNECTOR PORT VIDEO CONNECTOR or USB Video cable USB Cable USB CONNECTOR Serial touchscreen cable Speaker cable Monitor power cable (US/Canada) European monitor power cable DVI-D video cable Adapter... - Page 14 STEP 1- •...
- Page 15 CONNECTIONS ON UNDERSIDE VIDEO PORT FEMALE 15-PIN VIDEO CONNECTOR VIDEO CABLE -pin DVI-D cable...
- Page 16 CONNECTORS ON THE UNDERSIDE USB TOUCHSCREEN CONNECTOR FEMALE 9-PIN SERIAL TOUCHSCREEN CONNECTOR SERIAL TOUCHSCREEN CABLE...
- Page 17 CONNECTIONS ON UNDERSIDE SPEAKER PORT SPEAKER CABLE...
- Page 18 CONNECTIONS ON UNDERSIDE POWER POWER CABLE BRICK POWER SUPPLY...
-
Page 19: Optimizing The Lcd Display
Optimizing the LCD Display To ensure the LCD display works well with your computer, configure the display mode of your graphic card to make it less than or equal to 1024 x 768 resolution, and make sure the timing of the display mode is compatible with the LCD display. -
Page 20: Accessing The Vesa Mounting Interface
Accessing the VESA Mounting Interface If you want to convert your desktop monitor to a wall mount or kiosk monitor, follow the steps below to access the VESA mounting interface. You will need a screwdriver for the following steps. Remove the back cover of the stand by pulling forward on the bottom cut-out. -
Page 21: Installing The Driver Software
Installing the Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: • Windows • Windows • Windows • Windows 9 • Windows •... -
Page 22: Installing The Serial Touch Driver
Installing the Serial Touch Driver Installing the Serial Touch Driver for For Windows 2000 and NT 4.0 you must have administrator access rights to install the driver. Insert the Elo CD-ROM in your computer’s CD-ROM drive. If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program. -
Page 23: Installing The Serial Touch Driver For Ms-Dos And Windows 3.1
Installing the Serial Touch Driver for MS-DOS and Windows 3.1 You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS. To install Windows 3.x and MS-DOS from Windows 95/98, follow the directions below: Insert the Elo CD-ROM in your computer’s CD-ROM drive. -
Page 24: Installing The Usb Touch Driver
Browse to select the \EloUSB directory on the Elo CD-ROM. Choose Next. Once the Elo TouchSystems USB touchscreen driver has been detected, choose Next again. You will see several files being copied. Insert your Windows 98 CD if prompted. - Page 25 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e...
-
Page 26: Operation
About Touchmonitor Adjustments Your touchmonitor will unlikely require adjustment. Variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should be operating in native resolution, that is 1 Windows to choose 1 Operating in other resolutions will degrade video performance. - Page 27 Control Function MENU SELECT...
- Page 28 CONTRAST ANALOG CONTRAST AUTO CONTRAST Function Symbol P r o c e s s Controls the picture contrast Contrast Adjusts the picture contrast specifically for the analog VGA connection of Analog Contrast the LCD monitor. Automatically selects an appropriate contrast setting for the picture. Auto Contrast Controls the picture brightness.
- Page 29 Information Displays the current graphics mode. DSUB Analog/ Select the connection for the display: DSUB Analog (15-pin connector) or DVI Digital DVI Digital (24-pin connector). In this way you can connect your monitor to 2 computers (by simultaneously using both connectors) and switch between displays.
-
Page 30: Solutions To Common Problems
If you are experiencing trouble with your touchmonitor, refer to the following table. If the problem persists, please contact your local dealer or our service center. Solutions to Common Problems Problem No image appears on screen. “Out of Range” display ROUBLESHOOTING HAPTER Suggestion(s) - Page 31 Image has vertical flickering line bars. Image is unstable and flickering Image is scrolling Touch doesn’t work E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Use “...
- Page 32 The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best. For the Elo LCD touchmonitor, the native resolution is 1 for the images look best when viewed at their native resolution. You can lower resolution setting of a monitor but not increase it.
- Page 33 As an example, a SVGA resolution LCD panel has 800 pixels horizontally by 600 pixels vertically. Input video is also represented by the same terms. XGA input video has a format of 1024 pixels horizontally by 768 pixels vertically. When the input pixels contained in the video input format match the native resolution of the panel, there is a one to one correspondence of mapping of input video pixels to LCD pixels.
-
Page 34: Appendix B Touchmonitor Safety
Do not use a damaged power cord. Use only the power cord that comes with your Elo TouchSystems Touchmonitor. Use of an unauthorized power cord may invalidate your warranty. -
Page 35: Care And Handling Of Your Touchmonitor
Care and Handling of Your Touchmonitor The following tips will help keep your Elo Entuitive touchmonitor functioning at the optimal level. • To avoid risk of electric shock, do not disassemble the brick supply or display unit cabinet. The unit is not user serviceable. Remember to unplug the display unit from the power outlet before cleaning. - Page 36 Mode Resolution 720 x 400 640 x 480 640 x 480 VESA 640 x 480 VESA 640 x 480 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 VESA 800 x 600 832 x 624 VESA 1024 x 768 VESA 1024 x 768 VESA...
-
Page 37: Touchmonitor Specifications
Touchmonitor Specifications Table C.1 1 " LCD Touchmonitor Display Type Size Pixel Format Touchscreen Colors Display Brightness Back-light Lamp Life Viewing Angle Contrast Ratio Display Response Time Environmental Mechanical Electrical Speakers Agencies E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e Specifications Active matrix, thin film transistor (TFT), liquid crystal display... - Page 38 Table . IntelliTouch Touchmonitor Specifications Mechanical Positional Accuracy Touchpoint Density Touch Activation Force Surface Durability Expected Life Performance Sealing Optical Light Transmission (per ASTM D1003) Visual Resolution Gloss (per ASTM D2457 using a 60- degree gloss meter) Standard deviation of error is less than 0.080 in. (2.03 mm). Equates to less than ±1%.
- Page 39 Environmental Chemical Resistance Electrostatic Protection (per EN 61 000-4-2, 1995) E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e The active area of the touchscreen is resistant to all chemicals that do not affect glass, such as: Acetone...
- Page 40 Table . AccuTouch Touchmonitor Specifications Mechanical Construction Positional Accuracy Touchpoint Density Touch Activation Force Surface Durability Expected Life Performance Optical Light Transmission (per ASTM D1003) Visual Resolution Haze (per ASTM D1003) Gloss (per ASTM D2457) Top: Polyester with outside hard-surface coating with clear or antiglare finish.
- Page 42 See Detail A Detail A...
- Page 43 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e...
- Page 44 EGULATORY HAPTER I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein will likely result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
- Page 45 D) General Information to all Users: This equipment generates, uses and can radi- ate radio frequency energy. If not installed and used according to this manual the equipment may cause interference with radio and television communications. There is, however, no guarantee that interference will not occur in any particular installation due to site-specific factors.
- Page 46 "This application of this monitor is restricted to special controlled luminous environment. This screen surface trend to reflect annoying light of lamps and sunlight. To avoid these reflections the monitor should not be positioned in front of a window or directed to luminaries. The monitor is in compliance with Reflection Class III according to ISO 9241-7.
- Page 47 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e...
- Page 48 ARRANTY HAPTER Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. The warranty for the touchmonitors and components of the product are: 3 years monitor, 10 years IntelliTouch screen, 5 years Accu- Touch screen, 5 years Controller.
- Page 49 THESE REMEDIES SHALL BE THE BUYER’S EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY. EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE, SELLER GRANTS NO OTHER WARRANTIES, EXPRESS OR IMPLIED BY STATUTE OR OTHERWISE, REGARDING THE PRODUCTS, THEIR FITNESS FOR ANY PURPOSE, THEIR QUALITY, THEIR MERCHANTABILITY, THEIR NONINFRINGEMENT, OR OTHERWISE.
- Page 50 Numerics 17" LCD Touchmonitor (ET172XL-XXWB-X) Dimensions, 34 17 LCD Touchmonitor (ET172XL-XXWB-X) Specifications, 30 About the Product, 1 About Touchmonitor Adjustments, 19 Accessing the VESA Mounting Interface, 13 AccuTouch Touchmonitor Specifications, 33 Additional Color setting, 22 Agencies, 30 Analog Contrast, 21 Auto Adjust, 22 Auto Contrast, 21 Back-light Lamp Life, 30...
- Page 51 I n d e x - 4...
-
Page 52: Product Information
To find out more about Elo’s extensive range of touch solutions, visit our Web site at www.elotouch.com or simply call the office nearest you: Germany Elo TouchSystems, Inc. Elo TouchSystems GmbH & Co. KG 6500 Kaiser Drive Haidgraben 6 Fremont, CA 94555-3613...