Post bed feed
9.3 Setting the feed dog stroke movement
Abb. 30: Setting the feed dog stroke movement
①
(1) - Stroke eccentric
Proper setting
The feed dog has the same height to the throat plate at the front and rear
dead center.
To set the feed dog stroke movement:
1. Tilt the machine head ( p. 16).
2. Loosen the screws on the stroke eccentric (1).
3. Turn the stroke eccentric (1).
4. Tighten the screws on the stroke eccentric (1).
5. Turn the handwheel and check the feed dog movement.
44
Service Instructions 670/680 - 00.0 - 07/2017