Feeding The Workpieces And Starting The Sewing Process - Beisler 1281/5 Operating Instructions Manual

5.3 Feeding the workpieces and starting the sewing process

14
The sewing unit for closing seams 1281/5 works semi-automatically at
high speed.
The operator of the sewing unit has to do the following:
®
call up the desired seam program;
®
feed and align the workpiece precisely;
®
sew the first seam section manually;
®
start the automatic sewing process;
®
supervise the sewing process of the unit;
®
remove the finished parts from the stacker.
2 1
Feeding the workpieces and starting the sewing process
1) Select the seam program at the control panel.
2) Place the workpieces 2 on the worktable and align them.
3) Position the workpieces in the mouse 1.
4) Close the mouse.
5) Push both workpieces under the sewing foot 6 and directly in front
of the needle.
6) Step the foot pedal forward and sew over the pocket and the hip
bow manually.
7) Separate the trousers or skirt parts with three fingers. Hold one
finger under, one between and one above the workpieces.
8) Step the foot switch back. The contour guide moves between the
parts. The feeding puller lowers.
9) Step the foot pedal forward. The automatic sewing process starts.
10) The finished workpieces are stacked.
11) The mouse returns to the feeding position.
6 5 4 3