Description Of Product; Description Of Proper Use; Brief Description - Beisler 1281/5 Operating Instructions Manual

1.

Description of product

1.1 Description of proper use

1.2 Brief description

The 1281/5 is a sewing unit which can properly be used for sewing
light to medium-weight material. Such material is, as a rule, made of
textile fibres. These materials are used in the garment industry.
In general only dry material must be sewn on this machine. The
material must not contain any hard objects.
The seam is generally made with core thread, polyester fibre
or cotton threads.
The dimensions for needle and hook threads can be taken from the
table in chapter 4.2.
Before using any other threads it is necessary to estimate the
consequential dangers and to take the respective safety measures, if
required.
This sewing unit must only be installed and operated in dry and
well-kept rooms. If the sewing unit is used in other rooms, which are
not dry and well-kept, further measures to be agreed upon may
become necessary (see EN 60204-31 : 1999).
We, as a manufacturer of industrial sewing machines, assume that at
least semi-skilled operating personnel will be working on our products
so that all usual operations and, where applicable, their risks are
presumed to be known.
The Beisler 1281/5 is a sewing unit for closing long seams, as e.g.
®
trousers side seams and crotch seams,
®
side seams without vent in upper fabric and lining in skirt parts.
According to the machine head it is possible to sew
®
double-chainstitch seams (401),
®
4-thread safety seams (515) or 5-thread safety seams (516).
All sewing station components are mounted on a stand welded of
square steel tubes and controlled by a microprocessor system.
The sewing station is operated via a control panel. Here it is possible
to call up various control programs, to define new programs and to
check all inlets and outlets for maintenance and repair purposes.
Machine head
–
Pegasus overlock machine
EXT 3216-03
–
Direct drive Efka Type DC 1500 /AB 221
–
Microprocessor control, freely programmable
–
Light barrier for recognizing the seam beginning and seam end for
the automatic sewing start and stop
–
Programmable edge guide for different material thicknesses,
moving cross-line
1
3