Adjusting The Material Stop - Beisler 1281/5 Operating Instructions Manual

3.2 Adjusting the material stop

3 2
Caution: Risk of injury!
Switch the main switch off.
Adjust the material stop only with the sewing unit switched off.
Standard
The material stop 2 must completely abut on the sewing foot 3 so that
the material cannot be pushed upward between sewing foot 3 and
stop 2.
Correction
–
Loosen screws 1.
–
Push the material stop 2 completely against the sewing foot 3.
–
Tighten screws 1.
1
3
19