Printer Mechanism Removal - Epson LX-300 Service Manual

EPSON LX-300+

4.2.3 Printer Mechanism Removal

1. Remove the upper housing. (See 4.2.2 "Upper Housing Removal".)
2. Remove 3 screws (CBP, 3x10) securing the upper shield plate to the lower
housing. Remove the shield cover.
Upper Shield Plate
CBB (3x14) with washer
Figure4-3. Upper Shield Plate
3. Remove 2 screws with washer (CBP, 3x14) securing the printer
mechanism to the lower housing.
4. Lift the printer mechanism a little bit and remove harnesses from the
main board assembly.
Disassembly and Assembly
CPB (3x10)
CBB (3x14) with washer
Printer Mechanism
Disassembly and Assembly
Printer Mechanism
Figure4-4. Harness Removal
5. Remove the printer mechanism.
Perform Bi-D adjustment after removing the printer
mechanism.
Revision A
Main Board Assembly
70