Epson LX-300 Service Manual page 91

EPSON LX-300+
Drive PF roller
Rear driven PF roller
Figure 6-5. PF Roller Assembly
Release shaft
Paper guide assy.
Figure 6-6. Paper Guide Assembly
Maintenance
Lubricate G-26 to the shaft of the
drive PF roller and the rear driven
PF roller. (4 places)
PF roller assembly:
G-26, 1/2 grain of rice
Set the paper guide assembly
upside down and lubricate at the
touching part of the PF roller
assembly with the release shaft.
(4 places)
Paper guide assembly:
G-26, 1 grain of rice
Maintenance
Lubricate G-26 into the hole of the
right TR (tractor) frame facing to
the TR guide shaft and the left TR
frame.
Tractor assembly:
G-26, 1/2 grain of rice
Figure 6-7. Tractor Assembly
The picture at the left is the back
Oil Pad
of the printhead.
1. Set the oil dispenser 0.30ml.
2. Lubricate O-2 on the Oil pad.
Oil pad:
O-2, 0.28-0.32 cc
Note: Make sure that the setting of
the oil dispenser is correct.
Figure 6-8. Oil Pad
Revision A
91