Upper Housing Removal - Epson LX-300 Service Manual

EPSON LX-300+

4.2.2 Upper Housing Removal

1. Remove platen knob, cover assembly, printer, tractor unit and paper eject
unit. Remove the color upgrade kit if it is installed.
2. Set the release lever to the tractor feed.
3. Remove 4 screws (CBP, 3x10) securing the upper housing to the lower
housing.
4. Remove the upper housing.
Upper Housing
Figure4-2. Upper Housing Removal
Disassembly and Assembly
CPB (3x10)
CPB (3x10)
Disassembly and Assembly
When installing the upper housing, be sure to insert
LEDs on the panel board to the LED holes of the upper
housing.
Upper Housing
Revision A
LED
Panel Board Assembly
69