Epson LX-300 Service Manual page 90

EPSON LX-300+
Lubrication Points
RD ratchet shaft
Combination Gear 5.1, 16.2
Driven pulley assy.
RD ratchet
Figure 6-1. Left Frame Assembly
Figure 6-2. Teeth of Gears at the Left Frame
Maintenance
Lubricate G-26 on the 3 shafts and 1
boss of the left frame.
G-26, 1/2 grain of rice
Lubricate G-26 on the shaft of the RD
ratchet.
G-26, 1 grain of rice
Planetary lever assy.
Spur Gear, 13.2 Spur Gear, 13.2
Lubricate G-26 on teeth of gears.
G-26, 1/2 grain of rice
Figure 6-3. Shafts at the Right Frame Assembly
Maintenance
Lubricate G-26 at 3 places on 3
shafts at the right frame.
Shafts at the right frame assembly:
G-26, 1 grain of rice
Lubricate G-26 at 2 places on inside
of cam at slope surface of the
release lever.
Release lever:
G-26, 1 grain of rice
Figure 6-4. Release Lever
Revision A
90