Carriage Unit Removal - Epson LX-300 Service Manual

EPSON LX-300+

4.2.7.3 Carriage Unit Removal

1. Remove the printer mechanism. (See 4.2.3 "Printer Mechanism
Removal".)
2. Remove the printhead. (See 4.2.1 "Printhead Removal".)
3. Remove the timing belt from the carriage installation point.
Carriage Unit
Installation Point
Figure4-12. Timing Belt Removal
4. Remove the CR shaft grounding plate from the base frame on the left side
of the printer.
Disassembly and Assembly
CR guide grounding plate
Timing Belt
5. Rotate the right and left parallelism adjust bushing and remove them
6. Release the PG adjust lever hook, connecting to the left frame.
Disassembly and Assembly
PG adjust lever
CR guide shaft
Parallelism adjust bushing
Left frame
Base frame
Figure4-13. Carriage Unit Removal
from respective frame.
Revision A
Carriage unit
Parallelism adjust bushing
Oil pad
Right frame
75