Table of Contents
Advertisement
AV1 scart input
Use this socket to connect
ordinary VHS, S-VHS or Hi8
equipment to your TV.
AV2 scart input
Use this to connect digital
video broadcasting
equipment, home computers
and home entertainment
systems to your TV.
RF aerial socket
Use this socket for analogue
TV reception.
important note on installation
If you intend placing this TV into a cabinet or wall alcove, please ensure there
is at least a 100mm (10cm) gap to the sides, rear and top of the television. This
Do not allow soft furnishings, such as curtains to be draped over the TV whilst in
Never place the TV onto a carpet during normal operation - this could obstruct
Always place the TV on a flat surface, or if supplied, the stand accessory.
Failure to observe the above guidelines could result in serious
overheating of your TV, or even, in extreme cases, fire.
is to allow for adequate ventilation.
operation.
ventilation slots on the base of the TV.
Before connecting
external equipment,
please consult
Audio Visual Setup
section.
DIN sockets
The DIN sockets are used to
connect 2 external speakers for
which no amplifier is necessary. R
is for the Right external speaker,
and L is for the Left external
speaker.
Please Note: Do not connect
supplied rear left and rear right
external speakers to these
sockets. Obtain speakers with DIN
sockets from your HITACHI dealer.
18V Socket
The 18V power output socket
is specifically designed for
HITACHI accessories -
UNDER NO CIRCUMSTANCES
connect any other accessory
to this socket as this could
cause irreparable damage to
your equipment!
7
Advertisement
Table of Contents
