Table of Contents
Advertisement
Input the Duration time by using the
12
13
Once RECORD EVENT is complete, accept
The inputted programme to record can now be
14
15
To return to normal TV operation press the TV
PLEASE NOTE: DO NOT FORGET TO SET THE TIMER ON YOUR VIDEO. If your video uses
Video Link then the TV will automatically turn on the VCR for you. Check your VCR manual for
PLEASE NOTE: To record a programme from the TV without programming a record
event, put the TV into 'Active Standby'. You do this by pressing the Standby
followed by the AV
on the front of the TV will come on showing that the TV is in 'Active Standby'. In this mode, the
digital receiver is still operating, allowing you to record the current programme via AV1. Please
remember that this mode uses more power than full standby, and is not recommended for
52
Input the Date of
the programme to
10
'9' ( alternatively,
use the right/left cursor
buttons
NOTE: when using the right/left cursor buttons to enter a date,
reaching the last day of a calender month will increase (or
decrease, depending on which way you are adjusting the day
value) the month value by one.This is also true of the year.
For example 31-01-01 +
11
NOTE: The RECORD
EVENT ENTRY menu can
operate on either an a.m/p.m
or 24 hour clock service. This
broadcaster of the service you are
watching, but is normally 24hour.
buttons '0' to '9' on your handset.
selection.
viewed in RECORD MENU.
Repeat if necessary .
button on your handset.
key within 3 seconds. The TV will then switch off and the green light
be recorded
using the
buttons '0' to
)
Input the
Start time
using the
buttons
'0' to '9'.
will depend on the
details on this.
long term use.
= 01-02-01
key,
Advertisement
Table of Contents
