Table of Contents
Advertisement
Advanced TV Setup
Please Note : Your TV is supplied with 2 RF leads. One of these leads has a 'block' at each end. This is the
AERIAL
DVD PLAYER/
COMPUTER/GAMES
DIGIBOX
1
Connect your aerial flylead to the digital 'link' lead. Keep the flylead as short as possible and replace
2
Connect the digital 'link lead' to TV 'in' socket marked
above carefully when connecting the digital 'link lead', as there are 2 sockets marked
3
4
5
10
digital 'link lead'. Connect as shown in the diagram below.
VCR
Connect TV 'out' to DIGIBOX 'in' socket. This socket may also be marked
Connect DIGIBOX 'out' to VCR 'in' socket. This socket may also be marked
Connect VCR 'out' to TV 'in' socket marked
with an adaptor if feasible.
your TV. Use the socket on the left.
ADAPTOR
1
4
. Please Note: Follow the diagram
.
at the rear of
.
.
Advertisement
Table of Contents
