Table of Contents
Advertisement
...notes on digital audio setup
The Digital Audio Setup menu allows you to control the sound output of any external equipment
you have connected through the Audio Visual sockets. For example, if the connection from your
external equipment to the television is via AV1, the Digital Audio source should be set as AV1.
6
Once highlighted, adjust the chosen
7
controls by pressing the LEFT/RIGHT
digital input source
The digital audio setup menu allows the digital audio decoder in your television to be assigned to
decode mode
Digital Your television ignores the analogue input on the selected AV and instead uses the optical or
Auto Your television will automatically select between digital and analogue sources. If both are
Analogue The television ignores the digital input in either the optical or coaxial connector and instead
listening mode
When listening to a Dolby Digital source with the television sound mode set to Dolby Digital
this control allows you to take advantage of special codes stored on the disc to reduce, or increase
Maximum makes the best use of the televisions dynamic range. It will enhance sound effects such
Standard is the normal listening mode. It does not make full use of your televisions dynamic range,
Night mode allows the audio to be reproduced in such a way that the impact of soundtrack
extremes (such as explosions) are reduced while quiet passages are 'boosted', allowing all the audio
information to be heard at a low volume level. As it's name suggests, this mode is
8
44
1
MAIN MENU appears.
2
3
4
5
Select the control to be adjusted by
using the UP/DOWN cursor buttons.
cursor buttons.
the AV scart input, that your DVD, CD player is connected to.
There are three possible decode modes...
present, the digital source takes priority.
uses the analogue information on the selected AV as its source.
but is a good compromise for all day viewing/listening.
intended for nightime viewing.
To return to normal TV operation press the TV button on your handset.
Press and hold the
MENU button for 5
seconds. The
INSTALL option in the
Press the cursor
DOWN button to
select INSTALL..
Once highlighted,
accept selection.
Press the cursor
DOWN button to
select DIGITAL
AUDIO SETUP .
Once highlighted,
accept selection.
see also Sound Mode for effects
coaxial input as its source.
sound effects.
as explosions or screams
Advertisement
Table of Contents
