Table of Contents
Advertisement
Important : Before you switch on your television, it is important that the external speakers
supplied with your television are connected. This can be seen in the External Speaker Setup
connecting to the mains socket
Please Note - If you have not already done so, please read television safety
insert plug...
important note on VCR
Do not switch your TV on until all external equipment is connected. If you have a Video
Cassette Recorder connected to this TV please ensure that it is switched on before automatic
tuning begins. Insert a pre-recorded tape into your VCR and begin playback of your equipment.
* Please Note : If this screen does not appear at
Switch On, follow steps 4 - 14. If the screen does
appear, go directly to step 9, then continue.
4
Press and hold the MENU button for 5 seconds.
The INSTALL option in the MAIN MENU appears.
5
Press the cursor DOWN button to select
6
18
before connecting your television and external equipment.
This ensures that your VCR is tuned in during the autotune procedure.
To make your programme
tuning easier, HITACHI have
1
2
3
layout of the rear of your
TV and the Autotune options.*
It is recommended that both
analogue and digital
programmes are stored at the
same time, so press button '1'
on your handset and
AUTOTUNE will begin.
INSTALL.
Once highlighted, accept selection.
section.
installed an automatic
tuning procedure to find
the services in your area.
Switch your TV on.
If you are satisfied all external
equipment has been connected, you
can begin AUTOTUNE.
The first screen
viewed will show a
...and switch on
Advertisement
Table of Contents
