Table of Contents
Advertisement
problem identification
6. One or more of the rear
channels is not working.
7. The sound from the external
speakers seems to be coming
from the wrong source (ie. the
left speaker sound is coming
from the centre speaker).
8. No digital mode options
available in Sound Mode
Menu.
9. Only left and right speakers
are working.
68
possible cause
The disc placed in your external
equipment has no surround
information on it.
The rear speakers are switched
off.
You are in Stereo mode.
The cables are connected
incorrectly.
You have Surround Speakers set
to 'NONE' in the Speaker Setup
menu.
You are playing a disc with an
incompatible sample rate.
The speaker cables are
connected incorrectly.
Your external equipment has not
been configured to output a
digital bitstream, does not
support DTS, Dolby Digital or
MPEG output, or the correct
format is not enabled on the
external equipment.
You have not selected a DTS,
Dolby Digital or MPEG track from
the DVD title menu
The speaker cables are
connected incorrectly.
Are headphones inserted into
front control panel?
You are playing a disc with a
high sample rate.
You are in stereo mode.
The Rear, Centre and Subwoofer
speakers are set to 'NONE' or
the Rear, Centre and Subwoofer
amplifiers are switched off.
There is no surround/centre/ LFE
information encoded onto the
disc.
Your external equipment has not
been configured to output a
digital bitstream, does not
support DTS, Dolby Digital or
MPEG output, or the correct
format is not enabled on the
external equipment.
You have not selected a DTS,
Dolby Digital or MPEG track from
the DVD title menu
remedy
This is normal operation
Check the Speaker Setup
menu.
Change the mode in the
Sound Mode menu.
Check the speaker
connections.
Check the Speaker Setup
menu.
This is normal operation
Check the speaker
connections.
Use the noise sequencer in the
speaker setup menu to check
the speakers are positioned
and connected properly.
Refer to external equipment
instructions for compatibility.
Refer to title menu on disc
to set audio format
Check the speaker
connections.
Use the noise sequencer to
check the speakers are
positioned and connected
properly.
Remove headphones to
adjust Surround Mode.
This is normal operation.
Change the mode in the
Sound Mode menu.
Check the Speaker setup
menu
This is normal operation.
Refer to external equipment
instructions for compatibility.
Refer to title menu on disc to
set audio format
Advertisement
Table of Contents
