Table of Contents
Advertisement
To switch your TV between digital and analogue systems, the digital button on
...notes on signal source entry
Each piece of external equipment connected to your TV must have its own input socket. It
would also be easier, and more organised, if the external equipment connected also had its own
programme number. Signal Source entry allows us to tell the allocated programme what equipment is
connected to which socket. This would make the switching between normal operation and the
Use the cursor keys to move the
6
selection bar over the AV required
Once highlighted, accept the selection to
7
change your TV's Audio Visual setting and
you will see the selection bar turn red - it is
Select your method of signal source
8
entry using the UP/DOWN cursor buttons.
24
your handset has to be pressed.
connected equipment much smoother.
For example, if you want to connect a games machine to your TV -
1. connect to socket AV2 via a scart lead.
2. give your games machine an empty programme number of its own.
4. give this channel the correct AV programme source (in this case AV2).
Ensure that the TV is in Analogue mode using the
Press and hold the MENU
1
seconds. The
INSTALL option in
the MAIN MENU appears.
Press the cursor
2
DOWN button to
select INSTALL .
Once highlighted,
3
accept selection.
Press the cursor DOWN
4
button to select
MANUAL SETUP .
5
Once highlighted,
accept selection.
to be adjusted.
ready to be changed.
* Analogue Mode only
3. if desired change this programme name.
DIGITAL button.
button for 5
Advertisement
Table of Contents
