Table of Contents
Advertisement
digital options in sound mode
When your television is switched to an AV scart input whose decode mode is set to
AUTO/DIGITAL and a digital signal source is connected and playing on the coaxial or optical
connectors, the options found in the SOUND MODE menu become dependent on the type of
Please note: to enjoy the sound benefits of Dolby Digital, DTS etc.you will require software (eg.
DVD disc, in which Dolby-D, DTS etc. signals are recorded.) and suitable hardware (some form
DTS signal options
DTS Digital x/y.z* -
Stereo -
Dolby Digital signal options
Dolby Digital x/y.z*-
Dolby ProLogic -
Stereo -
MPEG signal options
MPEG Multichannel -
MPEG Stereo -
Stereo -
44.1/48kHz PCM signal options
Dolby Pro Logic -
Stereo -
96 KHz signals
Stereo -
be
*x/y.z - display format of audio digital channels present which is explained in
greater detail in digital audio status section where
**Downmix - this is when all the five multi-channels (left, right, surround left,
surround right, centre) are outputted through the televisions left and right speakers
Please note: When the television is set to digital mode and no external equipment is
connected, your television will assume PCM mode and will offer the options listed above in
the PCM signal options . It must also be noted that the type of audio signal which will be
6
To return to normal TV operation press the TV button on your handset.
digital signal being received.
of disc player, which can pick up a digital signal).
Digital Theater Surround mode which gives the ambience
and presence of being in a theater.
Stereo mode which provides a downmix** of the above
through your televisions internal left and right speakers.
In this mode surround sound can be created, with the
digital audio capabilities increasing the precise localisation of
sounds, improving the ambience experienced.
In this mode surround sound can be created.
Stereo downmix** mode which inputs the Dolby Digital x/y.z
information through your televisions internal left and right
speakers.
In this mode surround sound can be created using
the five audio channels (from your left speaker, right speaker,
centre speaker, left surround speaker and right surround
speaker) and also the LFE channel.
Stereo mode which provides signals for your televisions
internal left and right speakers.
Stereo mode which provides a downmix** of the multi-
channel signal through your televisions internal left and right
speakers.
In this mode surround sound can be created.
Stereo mode which provides signals for your televisions
internal left and right speakers.
A maximum audio sample rate in which stereo is the only
available option. No surround sound can be created when
you are receiving this signal. (Although Dolby Pro Logic is
displayed in the Sound Mode menu, Dolby Pro Logic will not
available).
X = front channel Y = rear channel Z = sub woofer
outputted can usually be found on your external equipment.
37
Advertisement
Table of Contents
