Hitachi D36WF840N Instruction Manual page 43

Hide thumbs Also See for D36WF840N:
Table of Contents

Advertisement

Once highlighted, adjust the chosen
15
controls by pressing the LEFT/RIGHT
cursor buttons.
...notes on speaker options
The speaker controls can be set to either SMALL or LARGE. This is to specify the type of
speaker connected. If your connected speakers low frequency response (the bass or 'boom' sound)
is poor adjust the chosen speaker value to SMALL. If the low frequency response is good set the
speaker value to LARGE - this allows the bass performance to be optimised. The Centre Speaker
and Surround Speaker(s) also have a setting of NONE. Use this as the setting if you have no
centre or surround speakers connected, or you do not want to hear the sound from these speakers.
To view other Speaker Setup options
16
use the up/down buttons to highlight
17
Once highlighted, accept selection.
To return to normal TV operation without viewing other options press the television
...notes on amplifier options
This menu allows your TV's own internal amplifiers to be switched off to prevent sound from
appearing from the appropriate speakers. This is useful if connecting external amplifier equipment to
18
Select the control to be adjusted by using the
UP/DOWN cursor buttons.
Once highlighted, adjust the chosen controls by
19
pressing the LEFT/RIGHT cursor buttons.
To view other
Speaker Setup
options use
12
the
UP/DOWN
buttons to
highlight MORE...
Once
13
highlighted,
accept
selection.
To return to normal TV operation without viewing other
options press the TV button on your handset.
Select the control
to be
14
adjusted by
using the
UP/DOWN
cursor buttons.
MORE...
button on your handset.
the RCA phono line outputs of the TV.
43

Advertisement

Table of Contents
loading

Table of Contents