Table of Contents
Related Manuals for Hitachi 32UDX10S, 36UDX10S
Summary of Contents for Hitachi 32UDX10S, 36UDX10S
- Page 1 SOLID STATE COLOR TV 32UDX10S OPERATING GUIDE SETUP CUSTOMIZE VIDEO AUDIO IMPORTANT SAFEGUARDS FIRST TIME USE THE GENIUS REMOTE CONTROL ULTRATEC BIT-MAP ON-SCREEN DISPLAY THEATER USEFUL INFORMATION INDEX 36UDX10S 4-20 21-33 34-59 60-67...
-
Page 2: Important Safety Instructions
Please read it carefully and apply the knowledge you obtain from it to the proper operation of your HITACHI television. Please fill out your warranty card and mail it to HITACHI. This will enable HITACHI to notify you promptly in the improbable event that a safety problem should be discovered in your product model. - Page 3 (non-moving) patterns can cause permanent damage to television receivers. Such PATTERN BURNS constitute misuse and are NOT COVERED by your HITACHI Factory Warranty. When using the Picture-in-Picture function, the sub-picture should not be left permanently in one corner of the screen or a PATTERN BURN may develop over a long period of time.
- Page 4 2. Two AA size, 1.5V batteries (For Remote Control Unit). For information regarding how to obtain these accessories, please call TOLL FREE 1-800-448-2244 for your nearest HITACHI Authorized Parts Distributor in the continental United States. For Alaska please contact your nearest HITACHI regional office.
-
Page 5: Remote Control Battery Installation And Replacement
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT 1. Open the battery cover of the remote control by pushing the notched part of the cover with your fingers, and pulling the cover off. 2. Insert two new AA size batteries in the remote. When replacing old batteries, push them towards the springs and lift them out. -
Page 6: How To Set Up Your New Hitachi Color Tv
The magnetic field of external speakers may cause the picture to distort if the speakers are placed too close CAUTION: to the color television. Move the speakers away from the color TV until there is no picture distortion. HOW TO SET UP YOUR NEW HITACHI COLOR TV... -
Page 7: Hook-Up Cables And Connectors
HOOK-UP CABLES AND CONNECTORS Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. -
Page 8: Front Panel Controls
NOTES: 1. Your HITACHI TV will appear to be turned OFF if there is no video input when VIDEO: 1, 2 or 3 is selected. Check the Power Light to make sure the TV is turned off when not in use. - Page 9 FRONT PANEL CONTROLS POWER CH - CH + VOL - VOL + MENU INPUT PUSH CURSOR PUSH Channel Volume Buttons Buttons POWER CH - CH + VOL - VOL + INPUT EXIT MENU CURSOR Power MENU Infrared INPUT/ Sensor Button EXIT INPUT 3 S-VIDEO...
-
Page 10: Front Panel Jacks And Connections
The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: CONVERGENCE ADJUST 1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture NOTE: may be abnormal. -
Page 11: Rear Panel Jacks
REAR PANEL JACKS Antenna Input/Output The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture. (ANT B cannot be displayed as a sub-picture.) The antenna output labeled TO CONVERTER allows the ANT A connection to pass directly to a different source such as a cable box, only when ANT B is displayed as a main picture. - Page 12 Component: Y-P Input Input 2 provides Y-P jacks for connecting equipment with this capability, such as a DVD player or Set Top Box. NOTES: DO NOT connect standard VIDEO or S-VIDEO to Input 2 when using Y-P B P R input. 2.
-
Page 13: Rear Speaker Terminal Connections
REAR SPEAKER TERMINAL CONNECTIONS Outside antenna or cable TV coaxial cable 2-Way signal splitter Cable TV Box INPUT OUTPUT INPUT Stereo System Amplifier NOTE: Connect only 1 component to each input jack. 2. Follow connections that pertain to your personal entertainment system. TYPICAL FULL-FEATURE SETUP VCR #1 OUTPUT... -
Page 14: Tips On Rear Panel Connections
TIPS ON REAR PANEL CONNECTIONS TIPS ON REAR PANEL CONNECTIONS S-VIDEO connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections in place of the standard video connection if your device has this feature. If your device has only one audio output (mono sound), connect it to the left audio jack on the television. -
Page 15: Connecting External Audio Sources
CONNECTING EXTERNAL AUDIO SOURCES CONNECTING EXTERNAL AUDIO AMPLIFIER To control the audio level of an external audio amplifier with the remote control, connect the system as shown below. AUDIO TO HI-FI INPUT Stereo System Amplifier NOTE: To prevent damage to the speaker and distorted sound, set the volume control of the audio amplifier lower and adjust the sound using the remote control of the TV set. -
Page 16: Connecting External Video Sources
(ANTENNA) INPUT Rear Panel of Television ANT A CONVERTER S-VIDEO S-VIDEO S-VIDEO ANT B VIDEO VIDEO VIDEO (MONO) (MONO) AUDIO AUDIO AUDIO MONITOR INPUT 2 INPUT 1 (INPUT) VIDEO Back of AUDIO OUT VIDEO OUT Hitachi Model or Similar Model... - Page 17 Press the INPUT button to return to the previous channel. Back of OUTPUT Hitachi Model or Similar Model NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.
- Page 18 Back of S-VIDEO OUTPUT VCR or Laserdisc Player Hitachi Model or Similar Model NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.
- Page 19 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is NOTE: played back will be abnormal if the connection is loose. 2. See page 14 for tips on REAR PANEL CONNECTIONS. DVD Player Hitachi Model or Similar Model VIDEO AUDIO OUTPUT...
-
Page 20: Audio System Setup
AUDIO SYSTEM SETUP Match the numbers below to the diagrams for speaker placement and refer to the table for the different surround sound requirements. (See page 58 for SRS and BBE functions.) The television s internal speakers. These speakers are connected to a separate audio amplifier. Use the Audio to HI-FI output on the television. REQUIRED CONNECTION FEATURE... -
Page 21: Light Button
THE GENIUS REMOTE CONTROL (CLU-577TSI) In addition to controlling all the functions on your HITACHI color TV, the new remote control is designed to operate different types of VCRs, CATV (Cable TV) converters, satellite receivers, DVD players, and other audio/video equipment with one touch. Basic operation keys are grouped together in one area. -
Page 22: How To Use The Genius Remote To Control Your Tv
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV POWER button Press this button to turn the TV set on or off when the remote is in TV mode. TV button When the TV button is pressed, it will blink, to indicate the remote is in TV mode. VCR button When the VCR button is pressed, it will blink to indicate the remote is in VCR mode. - Page 23 HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV AV1, AV2, AV3 buttons When pressed, each of these buttons will blink to indicate the remote is in Audio/Video mode. (see page 32) CHANNEL selector buttons CHANNEL selector buttons are used to set FAMILY FAVORITES, CHANNEL MEMORY, etc. Enter one, two, or three numbers to select channels.
- Page 24 HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV ASPECT button Press this button to quickly change the aspect ratio of the viewable video between 4:3 and 16:9. (See page 55 for more information) COMMERCIAL SKIP (C.S.) button Press this button repeatedly to select channel skip time (30~180 seconds) when no menu is displayed and the TV will tune to the last channel viewed when the selected amount of time is up.
-
Page 25: Picture In Picture (Pip)
PICTURE-IN-PICTURE (PIP) Your HITACHI Color TV incorporates Dual Tuner technology designed for improved viewing enjoyment. This Dual Tuner feature allows you to view antenna inputs on both the main picture and sub-picture simultaneously, with separate tuning control for each. The Dual Tuner can operate with only one input (ANT A only) or two inputs (ANT A and ANT B). - Page 26 PICTURE-IN-PICTURE CONT. SURF MODE PIP This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, along the right edge of the screen. Press the PIP button a second time to remove the sub-pictures from the screen. ANT A 28 NOTES: 1.
- Page 27 PICTURE-IN-PICTURE (PIP) FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FREEZE button again.
-
Page 28: Using The Remote To Control Vcr Functions
After replacing the batteries repeat the entire programming procedure as stated above. The MENU button will act as the VCR MENU button for HITACHI VCRs. The LAST CH button will act as your VCR ENTER button if required. - Page 29 USING THE REMOTE TO CONTROL CABLE BOX FUNCTIONS Operating the precoded function for your cable box. This remote is designed to operate different types of cable boxes. You must first program the remote to match the remote system of your cable box. (refer to page 33) Turn ON your cable box.
- Page 30 USING THE REMOTE TO CONTROL SATELLITE RECEIVER Operating the precoded function for your satellite receiver. This remote is designed to operate different types of satellite systems. You must first program the remote to match the remote system of your satellite receiver. (refer to page 33) Turn ON your satellite receiver.
- Page 31 USING THE REMOTE TO CONTROL DVD FUNCTIONS Operating the precoded function for your DVD player. This remote is designed to operate different types of DVD players. You must first program the remote to match the remote system of your DVD player. (refer to page 33 for pre-codes) Turn ON your DVD player.
-
Page 32: Using The Remote
TO CONTROL ADDITIONAL AUDIO/VIDEO EQUIPMENT Operating the precoded function for your Audio/Video component. This remote is designed to operate different types of Audio/Video component. You must first program the remote to match the remote system of your Audio/Video component. (refer to page 33 for pre-codes) Turn ON your Audio/Video component you wish to control with the Remote. - Page 33 Magnavox ..15, 23, 29, 31, 35 Hitachi ..... 07 Magnin ....44 JVC .
-
Page 34: Ultratec Osd
AUDIO THEATER 1. Press MENU on the remote control to display the different features on your HITACHI Projection TV. 2. Press the THUMB STICK to highlight a different feature. 3. Press EXIT on the remote control to quickly exit from a menu. - Page 35 ULTRATEC OSD 1. MENU LANGUAGE 2. PLUG & PLAY 3. SIGNAL SOURCE 4. AUTO CHANNEL SET First time set up for channel buttons. 5. CHANNEL MEMORY 6. CHANNEL LIST 7. CLOCK SET SET UP 8. ROTATION 9. COMPONENT SET 1. CHANNEL ID. 2.
-
Page 36: Menu Language
SET UP Select SETUP when setting your TV up for the first time. Use the THUMB STICK the function desired. SET UP Use THUMB STICK to select the sub-menu of your choice. You can also use the number buttons to directly access the sub- menu of your choice. - Page 37 SET UP This graphic guide function will help you to properly set up your TV or Home Theater System. Simply answer PLUG & PLAY three questions and a graphic will be displayed, showing you the optimum setup for your personalized system. CUSTOMIZE VIDEO AUDIO...
-
Page 38: Signal Source
SET UP Select ANTENNA if you are using an indoor or outdoor antenna. Select CATV if you have cable TV. SIGNAL SOURCE SETUP CUSTOMIZE VIDEO AUDIO THEATER 1. M E N U LAN G UAG E 2. P LU G & P LAY 3. -
Page 39: Auto Channel Set
SET UP This feature will automatically store active TV channels in CHANNEL MEMORY. This will allow you to skip AUTO CHANNEL SET unused channels when using CHANNEL UP ( ) or DOWN ( ). PRESS SELECT TO ACTIVATE/DEACTIVATE SETUP 1. MENU LANGUAGE 2. -
Page 40: Channel Memory
SET UP Use this function after AUTO CHANNEL SET to add or erase additional channels to the remote control CHANNEL MEMORY CHANNEL SETUP CUSTOMIZE VIDEO AUDIO THEATER 1. M EN U L AN GUAGE 2. P LU G & PL AY 3. -
Page 41: Channel List
SET UP This function allows you to review which channels are labeled in CHANNEL ID (ID.), which have been added CHANNEL LIST to CHANNEL MEMORY (SCAN), and which are protected by PARENTAL CONTROL (LOCK). SETUP CUSTOMIZE VIDEO AUDIO THEATER CH A N NEL LIS T AN T A SC AN LOCK... -
Page 42: Clock Set
SET UP The time must be set before you can use the 4 EVENT PROGRAM or TV TIME OUT. CLOCK SET TO S E T TI M E SETUP C L OC K S ET - - - - AM JAN 0 1 2 00 0 M E N U TO M E N U B A R TO Q U I T Use THUMB STICK... - Page 43 SET UP This feature allows you to adjust Picture Rotation. ROTATION PR E SS K E Y TO C ORREC T PI C TURE RO TAT ION SETUP PI CT U RE ROTAT ION • 0 0 + : R IG HT - : LE F T M E N U TO M E N U B A R TO Q U I T...
- Page 44 SET UP The COMPONENT SET function is very useful when setting up reception High Definition, Standard Definition COMPONENT SET and NTSC signals. PRESS SELECT TO ACTIVATE/DEACTIVATE SETUP COMP ON EN T SE T Y-P B P R 1 C OL OR SY STE M H D TV SD TV/ DV D M E N U TO M E N U B A R...
- Page 45 CUSTOMIZE This selection contains advanced features which will make TV viewing easier and more enjoyable. CUSTOMIZE Use this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60 CHANNEL ID. channels a name when CATV signal source is selected. SETUP THUMB 1 .
- Page 46 CUSTOMIZE Use this feature to give a name to any of the three video inputs. VIDEO ID. CUSTOMIZE VIDEO AUDIO SETUP 1 . C HA N NE L ID. 2 . V ID EO I D . 3 . F AM I LY FAVORIT ES 4 .
- Page 47 CUSTOMIZE This function allows you to group your favorite channels into six personalized categories that you can rename. FAMILY FAVORITES A total of 36 channels can be stored in the FAMILY FAVORITES function. (MENU) CUSTOMIZE VIDEO SETUP 1 . C HA N NE L ID. 2 .
- Page 48 CUSTOMIZE Use this function to display FAMILY FAVORITES selections as sub-pictures or to tune the main picture to a FAMILY FAVORITES desired favorite channel. (OPERATION) S e t Fa vo r it e Ch . THUMB STICK M E N U TO S U R F M OV IES M E N U TO S U R F Select a category using THUMB STICK...
-
Page 49: Parental Control
CUSTOMIZE This function will block out the picture and sound of the selected channel or video input. PARENTAL CONTROL It can also be used to keep the TV from being viewed for a scheduled amount of time that you set. The code to enter PARENTAL CONTROL is a four digit secret code number. - Page 50 CUSTOMIZE This function will automatically turn the TV on and off, one time only, every day, or once a week. 4 EVENT PROG. SETUP CUSTOMIZE VIDEO 4 EVEN T P RO G R A M - - : - - A M T V ON - - : - - A M T V OF F SUN ( DA Y O F W EE K ) - - CH AN N EL...
- Page 51 CUSTOMIZE Use this function to automatically turn the TV on and tune to VIDEO: 1, 2 or 3 when it detects a VIDEO input. AUTO LINK SETUP CUSTOMIZE VIDEO 1. CH A NNEL ID. 2. VI DE O ID. 3. FA MILY FAV ORIT E S 4.
- Page 52 CUSTOMIZE Closed Captions are the dialogue, narration, and/or sound effects of a television program or home video CLOSED CAPTION which are displayed on the TV screen. Your local TV program guide denotes these programs as SETUP CUSTOMIZE VIDEO 1 . C H A NNE L ID. 2 .
- Page 53 CUSTOMIZE This function introduces you to the First Time Tour Setup Feature, showing you basic TV FIRST TIME TOUR functions as well as helping you set up your TV or Home Theater System. This feature will be displayed every time your TV is turned on, unless you set FIRST TIME TOUR to OFF. I N T R O D U C E S Y O U T O T H E F I R S T T I M E T O U R S E T U P F E A T U R E .
- Page 54 VIDEO Select VIDEO to adjust picture settings and improve picture quality. VIDEO SETUP THUMB STICK 1. CONT RAS T 2. B RIGHTNE S S 3. COL OR 4. T INT 5. S HA RPNE S S 6. RE S ET 7.
- Page 55 VIDEO Your HITACHI color TV has the following functions which will adjust picture settings to produce the highest ADVANCED quality picture possible. SETTINGS THUMB STICK PRESS SELECT TO ACTIVATE/DEACTIVATE VIDEO ADVANCED SETTI NGS AUTO COLOR NOISE RED UCTION C OLOR TEMPERATURE...
- Page 56 AUDIO Select AUDIO to adjust the TV to your preference and to improve the sound quality. AUDIO THUMB STICK 1 . BASS 2 . T REB L E 3 . B AL A NCE 4 . RE SE T 5 . A DVA NCE D S E TT INGS M E N U T O M E N U B A R Use THUMB STICK...
- Page 57 AUDIO ADVANCED Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions. SETTINGS THUMB STICK PRESS SELECT TO ACTIVATE/DEACTIVATE AUDIO AD V AN C ED S ET T INGS ST ER EO MO NO SE CO ND A UD IO P ROGRA M √...
- Page 58 THEATER Use this function to choose picture and audio settings for a true home THEATER experience. THEATER THEATER MODES Use this function to choose from automatic picture settings to optimize your TV s performance. THUMB STICK SETUP CUSTOMIZE VIDEO AUDIO 1 .
- Page 59 Based on the principles of the human hearing system, SRS technology delivers and exciting and realistic 3D Sound experience from just two external speakers (or) the two internal speakers of your HITACHI Television. If your HITACHI Television is connected to an external audio system, SRS will also create an incredible 3D sound experience from two speakers and even enhance a complete multi-speaker surround sound system.
-
Page 60: Care Of Your Hitachi Color Tv And Your Remote Control
AA size batteries. Exposure of the viewing screen to prolonged direct sunlight or heat may cause the screen to permanently warp, resulting in a distorted picture. CARE OF YOUR HITACHI COLOR TV AND YOUR REMOTE CONTROL... -
Page 61: Reception Problems
RECEPTION PROBLEMS The TV set can generate sound distortion in external devices such as a radio. Please separate radio equipment from NOTE: the TV set to a considerable distance. ¥ IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. -
Page 62: Useful Info
3. If there is still no power, unplug the power cord from the wall. Wait 30 seconds and plug the power cord back in. Press the power switch again. This protective technology should provide for years of lasting entertainment from your HITACHI Color Television. - Page 63 USEFUL INFO Features: ¥ Superfine Picture Quality 700 Line Horizontal Resolution ¥ Remote (Controls many VCR brands, cable boxes, satellite boxes, and other audio equipment.) ¥ High Definition On-Screen Display (UltraTEC BIT-MAP) ¥ Full Set of Input Jacks, including S-VIDEO ¥...
- Page 64 Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico. Each facility will provide you with convenient and expedient assistance.
- Page 65 NOTES...
- Page 66 NOTES...
- Page 67 NOTES...
- Page 68 QR48441...